Automatic Pedestrian Entrance / Exit Sliding Glass Access Control
Turnstile
PRODUCT DESCRIPTION
SINOMATIC sliding barrier gate is an intelligent access management
device developed and produced by our company
after many years. This device organically integrates mechanical,
electronic, microprocessor control and various reading
and writing technologies are supported.
The slide gate turnstile is with high-quality DC brushless
motor.The motor is configured and advanced control system
which carried to truly achieve precise control, stable performance
with no maintenance.Lossless mechanism structure
is based on high technology adopted to ensure long lifespan.The
matrix type photoelectric stereoscopic detection
technology is adopted to sensitively detect the behaviors that
threaten the passageway safety, such as illegal intrusion,
reverse passing, tail-gating, and give out alarms through sound,
light, etc.The turnstile can be combined with other
security systems.
Our advantages
The appearance of the equipment is made of stainless steel cut by
laser then welding, beautiful and generous, rust-proof,
durable, and the external use of standard electrical interface, can
easily integrate the bar code card, ID card, IC card and
other card readers into the equipment, it provide a civilized and
orderly way, but also to eliminate illegal personnel access;
In addition, the system is specially designed to meet the
requirements of fire protection, in the event of emergency, to
ensure
the passage unimpeded, facilitate the timely evacuation of
personnel;
PRODUCT FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the
built-in keyboard on the main board
3. Mechanical anti-pinch function. If the gate meets resistance in
the reset process, motors will stop working
automatically within the prescribed time and reset again after the
default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically
until opening signal received
5. Support infrared photocell for anti-pinch and reset function
6. Automatic reset function. Should the user fail to pass within
the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user
automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc. (Access controller
needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on
12. Alarm function, in case of illegal intrusion and reverse
intrusion, etc.
PRODUCT SPECIFICATIONS
Model | SN-SLB02 |
Case Material | SS304, 1.2mm thickness |
Production Process | CNC Laser Cutting |
Size | 1200*330*980mm(Customization acceptable) |
Power input | AC100-240V,50/60HZ |
Operation voltage | DC24V, 3A, Power: 40W( Brushless Motor Optional) |
Electromagentic | Duty Cycle 100% |
Passage Width | 550mm |
Flap height | 1400mm(default) |
Flap Material | Acrylic |
Passage direction | Single directional/Bi-directional |
Operating time | 1S |
Throughput Rate | 30-40 persons/minute(Normally Closed) or 40 persons/(Normally Open) |
Reset Time after Power on | 3S |
MCBF | 5,000,000 Cycles |
Reset Time after failure | 10S |
Automatic Reset Function | Automatically locked within set time(Time Adjustable) |
Operation Humidity | 0~90%(No Freezing) |
Operation Temperature | -20℃~+60℃ |
Operation Eenvironment | Indoor,Outdoor(Shelter) |
Protection Level | IP45 |
Communication Interface | Standard RS485 interface, distance ≤1200 meters |
Input Interface | Relay switch signal or 12V electrical level signal or 12V pulse
signal of pulse width > 100ms, drive current >10mA |
