RS058 Integrate Detector Dewar Cooler Assembly
RS058 Stirling Cryo Cooler, Integrated Dewar Cooler Assembly for
Cooled Infrared Detectors
Product Description
RS058 an integral rotary stirling cryocooler which provides a
miniature closed cycle cooling system to ensure a cryogenic working
environment for the normal operation of cooled infrared detectors.
With the MTTF more than 10000hrs, the RS058 cryo cooler will exceed
your expectations that it is integrated into various terminal
products and operates in a very long time.
Its motor windings are separated from the working gas to prevent
contamination. High wear-resisting coating and clean room assembly
are applied to prolong the lifetime and high reliability. For
compactness, the electronic drive is built-in. An onboard
temperature sensor offers stand-by, remote shutdown and
over-temperature protection options. Integrate Detector Dewar
Cooler Assembly (IDDCA) is implemented to achieve compactness and
efficiency.
Main Features
- MTTF＞10000hrs
- Cooling Power: (@77K@20℃)＞550mW
- Cooling Time: <5mins (250J@77K@20℃)
- Low Consumption
- Low Noise
- Built-in Drive Electronics
Product Specifications
| Model | RS058 |
| Type | Integral Rotary Stirling Cryocooler |
| MTTF | ＞10000hrs |
| Size (mm) | 116×58.5×71 |
| Weight | ＜430g |
| Cooling Power | (@77K@20°C) ＞550mW |
| Working Temperature | -45°C~ +85°C |
| Storage Temperature | -56°C~ +85°C |
| Environmental Specification | MIL-STD-810 |
| Input Voltage | 18-28VDC/12-16VDC |
| Max Power Consumption | <13W |
| Steady Power Consumption | <7W (250mW@77K@20°C) |
| Cooling Time | <5min (250J@77K@20°C) |
| Cold Finger Dimension | Φ8mm |
| Electronics | Internal |
| Integration Method | IDDCA |
Industrial Applications
The RS058 integrated dewar cooler assembly is used for provide
cryogenic environment for the cooled infrared detectors.
Our Advantages
Customer Feedbacks
Exhibitions
Certificates
FAQs
1.What is the difference between low light, active IR and thermal
imaging?
Low light needs natural light and transforms weak natural light
image into enhanced electronic image through image intensifier;
Active IR actively emits infrared light and uses infrared beam
reflected by the target. It has very poor concealment;
Thermal imaging doesn’t need any light and is a passive infrared
night vision that detects infrared radiation difference between
targets and scene or different parts of an object. not be affected
by the changes of the surrounding lighting conditions, during night
or even in fog, rain and other harsh environments.
2. Can you block thermal imaging?
In most cases, you cannot. But infrared rays can't penetrate walls,
and also the glass can block IR. So, if you don’t want to be
detected, you can conceal behind glass or walls to block the
thermal imaging.
