Gas Leak Detection Camera
GST GAS330 Gas Leakage Detector Camera with 320x256 / 30μm Cooled
Infrared Detector
Product Description
Driven by improvements in production methods, the production and
use of industrial gas has grown rapidly. While bringing benefits to
the factory, the hidden danger of gas leakage is also increasingly
serious. Optical gas imaging (OGI) is a commonly utilized and very
effective way to detector the gas leak in the industrial factories.
GAS330 infrared gas leak detection camera developed by Global
Sensor Technology is specific for detecting minute fugitive
emissions of industrial gases. With a customized 320x256 / 30µm
cooled infrared detector, it works in the spectral range of
3.2~3.5µm for VOCs leak detection.
Global Sensor Technology has more than 10 years of experience in
infrared thermal imaging solutions and also many successful
integration cases for the gas leak detection. We are confident to
provide you with satisfactory service.
Main Features
- Resolution: 320x256
- Pixel Pitch: 30µm
- NETD≤15mK, High Sensitivity
- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm
- Wavelength Customizable Based on Different Requirements
- Integrate with DVP/CameraLink Interface Easily
Product Specifications
| Model | GAS330 |
| IR Detector Performance |
| Resolution | 320x256 |
| Pixel Pitch | 30μm |
| Cryocooler | RS058 |
| Spectral Range | 3.2μm±0.1μm~3.5μm±0.1μm MW |
| Cooling Time (20°C) | ≤8min |
| NETD (20°C) | ≤15mK |
| Image Processing |
| Frame Rate | 30Hz |
| Dimming Mode | Linear/Histogram/Mixed |
| Digital Zoom | ×1/×2/×4 |
| Image Direction | Horizontally/Vertically/Diagonally Flip |
| Image Algorithm | NUC/AGC/IDE |
| Electrical Specification |
| Standard External Interface | J30JZ 25pin |
| Analog Video | PAL |
| Digital Video | 16bit RAW/YUV: 16bit DVP/Cameralink Output |
| External Sync | Frame External Sync: RS422 Level |
| Communication | RS422, 115200bps |
| Power Supply | 20~28VDC |
| Stable Power Consumption | 12W |
| Dimension (mm) | 155×67×80 |
| Weight | ≤900g |
| Operation Temperature | -40°C ~ +60°C |
| Vibration Magnitude | Vibration: GJB Vehicle-mounted High Speed Transport
Shock: Half-sine Wave, 40g 11 ms, 3 Axis 6 Direction 3 Times Each |
| Optical Lens |
| Optional Lens | Fixed Zoom: 23mm/F1.5; 55mm/F1.5 |
Industrial Applications
The GAS330 gas leak detection thermal imaging camera is used for
visiualizing the invisible VOCs (volatile organic compounds) and
detecting gas leakage such as: Methane, Ethane, Propane, Butane,
Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene,
Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene
etc.
Our Advantages
FAQs
1.What is infrared detector / thermal imaging sensor?
Infrared waves cannot be seen with the human eye. Infrared detector
/ thermal imaging sensor is an optical-electrical device to react
to infrared radiation and thermal energy and convert it into
electrical signal and then output visible thermal images.
2.What is WLP?
WLP refers to wafer level package. It is the process of completing
high vacuum packaging directly on the entire MEMS wafer, then
scribing and cutting to make a single infrared sensor. Together
with metal package, ceramic package, they are the 3 main package
formats of uncooled infrared detectors.
3. What's the advantage of WLP?
WLP IR detectors are specially designed to meet the miniaturization
and low cost requirement in the application of infrared technology
to consumer electronics market. Global Sensor Technology, with
volume fabrication capability, is now offering a variety of WLP
infrared module solutions to boost more new applications of
emerging markets.
