30kw Portable Induction Heating Machine For Metal Heat Treatment
Descriptions of portable induction heating machine:
Portable Induction Heater is one kind of portable and mobile
induction heater integrated water and air cooling system.To heat
different kind of workpiece,the induction coiler is changeable and
replaceable.
Portable Induction Heating machine can be used for heating and
brazing various material,such as steel and copper, can also heat
and solder different kind of products,such as steel round rod and
flat sheet,copper and brass tube,bolts,nuts,shafts,bearings,round
steel,sheet,and so on.
Especially used for soldering and brazing the copper tube when
install the air condition,no need to use the gas fire again.
Technical parameters heat treatment machine:
Control Mode | All Digital Circuit Control |
Working Mode | Manual Mode/Automatic Mode |
Number of Heating Current Setting | 5-stage |
The number of stored workpiece parameters | 10/Mode |
Content of Working status | Time, Current |
Alarm Interface | Overcurrent, overpressure, under water, undervoltage, phase loss,
overheat. ect. |
Model | PHC-30 |
Output power | 3-30KVA |
Output frequency range | 10~60KHz |
Length of Main Extendion Cable | 2-5m |
Input Voltage | 380V±10% |
Input Frequency | 50/60Hz |
Input power factor | 0.95 |
Min Circuit Breaker | 3P-63A |
Max Inlet Water Temp | 35℃ |
Water Pressure(Max/min) | 4/6bar |
Working Environment Temp | +5℃~+50℃ |
Overall Dimensions(L*W*H) | 550*340*500 |
Applications of portable Induction Heating machine :
Heat treatment for various hardware and tools, such as plier,
wrench, hammer, ax,screwing tools and shear.
Heat treatment for various automobile and motorcycle fittings, such
as crankshaft,connecting rod, piston pin, chain wheel, aluminum
wheel, valve, rock arm shaft,semi drive shaft, small shaft and
fork.
Heat treatment for various electric tools, such as gear and axes.
Heat treatment for machine tools,such as lathe deck and guide rail.
Hardening for various hardware metal parts and machined parts, such
as shaft, gear chain wheel, cam, chuck and clamp etc.
Heating for hardware molds, such as small-size mold, mold accessory
and inner hole of mold.
Annealing of various stainless steel products, such as stainless
steel basin, annealed and extruded can, annealed folded edge,
annealed sink, stainless steel tube, tableware and cup.
Forging of various other metal work pieces, such as round steel,
sheet/plate, pipe and others.
Customers:
