150KW IGBT Energy Saving Forging Medium Frequency Induction Heating
Machine
Descriptions of induction heating machine:
Our induction heating machines adopt IGBT series and parallel
induction heating technology as the core. Heat the workpiece to a
certain temperature, and then cool it rapidly to change its machine
structure to achieve some special mechanic properties.
Technical parameters:
Item Model | ZP-150 |
| Rated Voltage(V) | 380V/50Hz |
| Input Power(kVA) | 5~120 |
| Input Oscillation Frequency(kHz) | 3~19 |
| Load Duration | 100% |
| Cooling Water Pressure(Mpa) | 0.25~0.4 |
| Output Water Flow(L/Min) | 35~50 |
Advantages of induction heating machine:
(1) High heating rate: 10 times faster than gas furnace heating
speed.
(2) Low-cost: The heating time is short, compared to other heating
methods, significantly reducing the amount of metal loss.
(3) Environmentally friendly: No pollution, no dust and little
noise.
(4) Fewer operators needed: Our induction heating machine can help
facilitate mechanization and automation and make good working
conditions, and the machine need fewer operators.
(5) Well controlled temperature: Metal billet heating process, the
temperature can be well controlled.
(6) Duty cycle 100%: Two induction furnaces can be configured side
by side for alternate use to avoid shutdown and improve production
efficiency.
(7) High degree of automation: The induction heating machine can be
connected with upper computer and IPC to realize the machine
operate automatically.
Application of induction heating machine:
(1) Heating: mainly for carbon steel, stainless steel, alloy,
brass, aluminum etc heating.
(2) Forging: Whole and partial induction forging for metal bar.
(3) Workpiece hot forging and rolling: standard parts, fasteners,
automobile parts, small hardware, round bar and billet, etc.
(4) Specific application: bolts and nuts forging and hot upsetting,
pipe induction forging and forming, auto parts (connecting rod,
crank shaft, etc.), cast iron beam heating and continuous heating,
oxygen bottle forging, rivet heating, long / round / square / angle
bar and billet heating, etc.
