42HSE05N-D24 Nema 8 Cnc Router Closed Loop Stepper Motor For 3d Printer CNC Router 1.5A 5.5mH 0.55N

Closed Loop Stepper Motor CNC router 42HSE05N-D24 1.5A 5.5mH 0.55N 3D printer
Motor Specification

HSS42 is 2 phase nema 17 series hybrid stepper servo driver. It adopts new
generation 32 bit DSP and vector control technology, which can avoid the stepper
motor losing steps and ensure the accuracy of the motor. The torque reducing is much
lower than open loop stepper motor when it is at higher speed. The high speed
performance and torque are enhanced in a great extent. Meanwhile the current control
is based on the load, that can reduce the motor temperature rising effectively, then can
extend the using life of the motor. The build-in place in position and alarm output
signal can help the upper monitor to monitor and control. The function of position
ultra difference alarm can ensure the machine work safely. The closed loop system is
an ideal improvement and a good replacement of open loop system, Besides that, it
also have some function of AC servo motors, but price is just half of AC servo.

1.2.1 Stepper motor closed loop system, never lose step.
1.2.2 Improve motor output torque and working speed.
1.2.3 Automatic current adjustment based on load, lower temperature rising.
1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and
wheel), no need to adjust gain parameter.
1.2.5 Motor work smoothly and low vibration, high dynamic performance at
acceleration and deceleration.
1.2.6 No vibration from high speed to zero speed
1.2.7 Drive nema 17 series 0.55N.m closed loop stepper motor.
1.2.8 Pulses response frequency can reach 200KHZ
1.2.9 16 kinds microsteps choice, highest 51200microsteps/rev.
1.2.10 Voltage range: DC24V~50V
1.2.11 Over-current, over-voltage and position ultra difference protection function

Dimension

Our maIn products includes stepper motors, closed loop system, gear reducer stepper motor, linear stepper motor, brake stepper motor, stepper drivers, controller board, spindles, power supplys, and other accessories.

      Changzhou Jinsanshi Mechatronics Co. Ltd. is located in Changzhou city, Jiangsu province, China. We are a comprehensive company which specializes in producing and researching motors and drivers. Our main products include hybrid step motor, and step driver, step servo motor and driver, integrated step servo motor, linear stepper motor, geared stepper motor, stepper motor with brake, brushless dc motor. And we are always researching and developing new products.

      Our products are widely applied in engraving machine, cutting plotter, textile machine, 3D printer, medical instruments, stage light equipment, robot, CNC, music fountain, and other industrial automatic equipment..

Our products are exported to all over the world, including Europe, South America, North America, Africa, Southeast Asia, etc.

We can solve the actual using problems for customers. Our products are highly commended by customers because of its easy operation, long using life, stable performance.

     We have passed ISO9001:2015, and have got the certification of CE. On the way of development, the principle of "efficiency is the life, quality is the fundamental" is always insisted by Jinsanshi people. We take the market as guidance, provide high quality products and good service to customers. We are expecting the cooperation with more friends from home and abroad in the near future.