Automatic horizontal glass washer Flat glass washer 2-10m / min foe
glass processing
Name application of Automatic Horizontal Glass Washing Machine
The automatic horizontal glass washer, which cleans and dries
glassware, performs automatic product cleaning from both sides at
the same time via the upper and lower brushes. The device should do
the following:
-Glass loading (automatic from processing line);
-Glass cleaning (automatic);
-Glass drying (automatic);
-Unload (manual).
- Requirements for compressed air.
Pressure – 6 bar.
Pressure-4 bar.
Water tank details►
The washing part in contact with water is made of stainless steel
Air knives detail ►
Two pairs of special stainless steel aluminum alloy air knife
configuration, strong wind, good air drying effect, with heating
system(with temperature control device, optional opening and
closing)
High quanlity profile detail►
Aluminum alloy assembled structure, no scrap concept, permanent
use,high efficiency, energy saving 70% efficiency
The fan detail►
The fan is equipped with an air filter in the air inlet chamber,
which has a large air volume and excellent air drying effect. The
entire fan box is installed at the top of the workshop and has an
air filter screen on the side for easy inspection and cleaning.
Technical parameters:
1. Maximum glass width: 2500mm (effective maximum: 2650mm)
2. Minimum glass specifications: 400mm x 400mm (limited to one row
on the left and right)
3. Glass thickness: 3mm-25mm (digital display)
4. Velocity range: Glass thickness within 3-25mm Vmax = 1-12m / min
5. Main drive, brush speed adjustment method: Frequency control
6. Table height: 900 ± 25mm
| Maximum glass width | 2500mm (effective maximum: 2650mm) |
| Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
| Glass thickness | 3mm-25mm (digital display) |
| Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
| Main drive, brush speed regulation method | frequency control |
| Table height | 900±25mm |
| Total power | 42KW(water-bearing wind heating: 15KW) |
| Water source | self-circulation, tap water (according to civil water standards)
and deionized water water supplement (deionized water equipment
shall be provided by the buyer) |
| Power source | 380V 50Hz |
| Dimensions (length × width × height) | approximately 6260*4800*3100 |
| Weight | 3940kg |
Glass washing machine used for cleaning and drying the upper and
lower surfaces of ordinary plate glass and high quality low-e
glass,it is composed of incoming segment, cleaning air-drying
segment and outgoing segment.
Origin of motor and main accessories:
| Main drive motor | Zhejiang province |
| Brush motor | Zhejiang province |
| High pressure air blower | Guangdong province |
| The water pump | Shanqing |
| brush | Anhui province |
| Rubber roller | Guangdong province |
| Frequency converter | VEICHI/Rexroth |
| Electric parts | Schneider |
Automatic Vertical Glass washing machine
Vertical Auto Industry Flat Glass Washing and Cleaning Machine
1. Overview of automatic vertical glasswasher and washer
The automotive industry flat glasswasher is used for glass cleaning
to process double glazing. The automatic vertical washer and washer
can perform the following functions: pre-cleaning, cleaning, and
drying of flat and Low-E glass. In production. Glasswashers have
the advantages of a small footprint, high efficiency, high
performance, and convenient maintenance.
2. Advantages of glasswasher
• 3 pairs of soft brushes with 0.1mm soft hair can be used to wash
Low-E glass
• Pre-cleaning (optional)
• The air knife can automatically adjust the width of the air knife
according to the thickness
• The new air knife uses an aluminum profile (Duckville Air Knife)
and the size of the air outlet is adjusted by the aluminum profile
duck beak. This reduces the number of adjusting screws, prevents
each screw from loosening, and avoids air knife resonance.
• European silencer system
• The operation box with a cleaning speed display can accurately
display the cleaning speed (8-10m). • Water tank automatic
temperature control, water supply system
• Stainless steel material
3. Main features of vertical glass washing machine
The automatic vertical washing machine uses a Siemens control
method that allows the washing speed of the washing machine to be
freely adjusted.
- Vertical Automatic washing machine can Wash online and offline
low-e glass, automatically recognizes Low-e film
- Vertical Automatic washing machine Using 6 pieces of soft brushes
- The pre-cleaning section adopts stepless frequency conversion speed
regulation, and the glass can run smoothly at the right speed.
- Water tank automatic temperature control, water replenishing system
Cleaning and water tanks are made of stainless steel and corrosion
resistant materials, and the transfer rollers are acid and alkali
resistant rubber rollers, which are automatically adjusted
according to the glass thickness.
- 304 stainless steel materials
- Automatic vertical washing machine Using intelligent intermittent
energy-saving working methods
- Automatic vertical washing machine adopt European silencer system
- The air knife can automatically adjust the width of the air knife
according to the thickness
- Automatic vertical washing machine Adopt variable frequency fan,
energy efficient, good cleaning effect
- Hierarchical type washing system
4. Tech Parameters of Vertical Glass cleaning and Drying Machine
| Power supply | Voltage(V) | 380 |
| Frequency (Hz) | 50 |
| Main power | kW | ≈35 |
| Washing speed | m/min | 1~7 |
| Max high speed | m/min | 10 |
| Min glass size | mm | 450×280 |
| Max glass size | mm | 2500×4000 |
| Glass thickness | mm | 3~15 |
| Roller height | mm | 500±20 |
| Total weight | kg | ≈3500 |
5. Detail of AutomaticGlass Washing Machine
horizontal glass washer
