Colored Fiberglass Profile Pultruded Composite Profiles U Shaped
Beam
How to produce FRP Pultrusion profiles?
The fibers are impregnated with polymer matrix
(resin,minerals,pigments,additives) and passed through a
pre-forming station that produces the stratification necessary to
give the profile the desired properties,After the pre-forming
step,the resin-impregnated fibers are pulled through a heated die
to polymerize the resin.
FRP Pultrusion production is a continous production process to
produce fiberglass reinforced polymer profiles of any length and
contstant section.Reinforce-ment fibers may be roving,continous
mat,woven robing,carbon or others.
Specification:
| Density | g/cm3 | 1.9~2.0 |
| Water absorption | % | ＜0.05 |
| Tensile Strength | Mpa | ≥1200 |
| Penetration test | Min | ＞20 |
| Water diffusion test | mA | ＜0.2 |
| Stress corrosion | h | / |
| DC breakdown voltage | kv | ＞50 |
Other available shapes:
Our workshop:
FAQ:
1. How can I get the reasonable price efficiently?
-Quantity, specification and 3D drawing will be helpful.
2. What file format are available for you to open?
-DWG, DXF, STP, IGS are available.
3. What is your payment term?
-T/T and Paypal are common, other methods could be discussed.
4. What is the shipping method?
-By sea/air/express (TNT, FEDEX, DHL, UPS, EMS,and ect.), assigned
forwarder also works.
*Reminder: All prices on the website are for reference only, and
the actual prices are subject to specific communication.
