ASTM B861-06 A Electronic Titanium Tube Target

133OD*125ID*2940L Include Flange Titanium Tube Target Titanium Gr2 ASTM B861-06 a The Target Material Vacuum Coating

The development trend of target material technology is closely related to the development trend of thin film technology in downstream industries. With the technological improvement of applied industries in thin film products or components, target technology should also be changed. In all application industries, semiconductor industry requires the most stringent quality requirements for target sputtering films. Now the 12 inch (300) silicon wafer has been manufactured, and the width of the interconnect is decreasing. Silicon wafer manufacturers require large size, high purity, low segregation and fine grain for the target, which requires that the target material has better microstructure. The diameter and uniformity of crystal particles have been considered as the key factors affecting the deposition rate of films. Flat panel display (FPD) has been in the market for computer monitors and TV sets dominated by cathode ray tubes (CRT) over the years. It will also drive the technology and market demand of ITO targets. Nowadays, there are two kinds of iTO targets. One is the sintering of nano indium oxide and tin oxide powder, the other is indium tin alloy target. The ITO thin films can be produced by DC reactive sputtering, but the target surface will oxidize and affect the sputtering rate, and it is not easy to obtain large-sized gold target. In terms of storage technology, the development of high-density and large capacity hard disk requires a large amount of giant magnetoresistance film material. CoF~Cu multilayer composite film is widely used in giant magnetoresistance thin film structures nowadays.

Main advantages
Low density high specification strength
Custom request customization
Excellent corrosion resistance
Good heat resistance
Excellent low temperature performance
Good thermal properties
Low elastic modulus

Company information

Feiteng Metal Material Co., Ltd. was founded in 2008, is a collection of production, processing, sales, research and development as one of the high-tech comprehensive enterprise. After more than ten years of efforts, our company's production technology development has been very mature. The company has been approved as a national high-tech enterprise by torch Center of Ministry of Science and Technology of China. At the same time, it has been rated as civilized and honest unit in Shaanxi Province, advanced unit of Quality and credit keeping in Shaanxi Province, excellent unit in Shaanxi Province, and several honorary titles of top ten brand units in Shaanxi Province. Our company mainly deals in metal and non-metal materials, products, equipment recording, production and processing as well as import and export business. In the first half of this year, the company has obtained ISO 9002 quality system certification and military system certification.

The company's main products are titanium and titanium alloy forgings, deep processing parts, and a variety of metal rotating target, multi-arc target, plane target, and small equipment production. Mainly used in aviation, aerospace, shipping, chemical, medical, ocean and other fields. Especially in recent years, the state has advocated military-civilian integration, and private enterprises can participate in the R&D and production of military projects. The company responded positively, invested more than 800,000 yuan to purchase equipment, participated in research and development, production and achieved certain results. And many countries well-known enterprises and research and development department in our company have good relations of cooperation, such as Wuhan 722 made antenna, Wuhan university of science and technology recycling tank, Henan Tengfei underwater submersible, and Baoti titanium equipment company, northwest institute of titanium all multiple project cooperation, successfully applied to the practice, and obtained the customer recognition and praise.

Our company's biggest advantage is titanium back tube, titanium alloy seamless tube and titanium copper tube target production. Among them, titanium copper tube target has achieved the international leading level, titanium back tube and titanium alloy seamless tube also belong to the domestic leading level. Baoji Feiteng Metal Material Co., Ltd. has set up a foreign trade company to do import and export trade, responsible for import and export products consultation, communication and product requirements, import and export registration and other issues. The staff responsible for communication were all overseas students. Ensure the quality of export products and services. Our company has a special quality department to check the quality of products, to ensure that the quality of products to meet customer requirements. Quality, efficiency and service are the most concerned issues of our company. We will try our best to meet customer requirements and timely communicate with customers in case of any uncertain factors to ensure that the products produced are as perfect as possible.

The tenet of Baoji Feiteng Metal Material Co., Ltd. is to maintain integrity and quality while producing efficiently and quickly, and share the results with customers for mutual benefit. We have been actively trying our best to provide the most efficient and convenient service, with low price and high quality to win the market welcome. This is how we win the trust of our customers and our business model.

If there is an opportunity, we will show you the advantages of our company, let us create considerable profits together, support and grow together. Since you trust our company's quality and service, I believe we will not let you down, give us an opportunity to give you a surprise. We sincerely hope to establish long-term friendly cooperation and business relations with your company.