CNAS C034 Gr2 Eco Friendly Titanium Foil Roll

Titanium Foil Roll Gr2 ASTM B265 Foil Roll

In modern times, the methods of making metal foil include forging, vacuum evaporation, powder rolling, electrolysis and calendering, etc., but calendering and electrolysis are still the main methods in large-scale production. Calendering method to produce aluminum, foil as a representative, because of its use is very wide so the development is extremely rapid, has formed an independent processing industry. Although both methods can be used in the production of copper, nickel and iron foil, electrolysis has obviously taken advantage. In calendering the foil is formed from thick to thin, while in electrolysis the foil is formed in reverse. Processing costs always increase with the increase of the process. Therefore, in addition to meeting performance requirements, thickness is also a factor to be considered when selecting a production method. Early copper foil production had been 0.8 mm as a boundary, thinner than its suitable electrolysis method. With the improvement of processing equipment and the boundary has been reduced to 0.2~0.4 mm. Calendered copper foil can be as thin as 6 microns but the width is limited. In the future, the demand for thin and wide foil tends to be more and more. For example, copper foil half a meter wide and 50 microns thick has gradually been replaced by one meter wide and 35 microns thick. The widest one requires a width of up to two meters, so the calendering production is limited. The use of copper foil, electrolytic copper foil has accounted for 90-95%. Others such as nickel, iron and alloy foil have similar trends.

Six big features:
1. High strength
2. The corrosion
3. High temperature resistance
4. Good low temperature resistance
5. Environmentally friendly metals
6. Good thermal conductivity

Company information

Feiteng Metal Material Co., Ltd. was founded in 2008, is a collection of production, processing, sales, research and development as one of the high-tech comprehensive enterprise. After more than ten years of efforts, our company's production technology development has been very mature. The company has been approved as a national high-tech enterprise by torch Center of Ministry of Science and Technology of China. At the same time, it has been rated as civilized and honest unit in Shaanxi Province, advanced unit of Quality and credit keeping in Shaanxi Province, excellent unit in Shaanxi Province, and several honorary titles of top ten brand units in Shaanxi Province. Our company mainly deals in metal and non-metal materials, products, equipment recording, production and processing as well as import and export business. In the first half of this year, the company has obtained ISO 9002 quality system certification and military system certification.

The company's main products are titanium and titanium alloy forgings, deep processing parts, and a variety of metal rotating target, multi-arc target, plane target, and small equipment production. Mainly used in aviation, aerospace, shipping, chemical, medical, ocean and other fields. Especially in recent years, the state has advocated military-civilian integration, and private enterprises can participate in the R&D and production of military projects. The company responded positively, invested more than 800,000 yuan to purchase equipment, participated in research and development, production and achieved certain results. And many countries well-known enterprises and research and development department in our company have good relations of cooperation, such as Wuhan 722 made antenna, Wuhan university of science and technology recycling tank, Henan Tengfei underwater submersible, and Baoti titanium equipment company, northwest institute of titanium all multiple project cooperation, successfully applied to the practice, and obtained the customer recognition and praise.

Our company's biggest advantage is titanium back tube, titanium alloy seamless tube and titanium copper tube target production. Among them, titanium copper tube target has achieved the international leading level, titanium back tube and titanium alloy seamless tube also belong to the domestic leading level. Baoji Feiteng Metal Material Co., Ltd. has set up a foreign trade company to do import and export trade, responsible for import and export products consultation, communication and product requirements, import and export registration and other issues. The staff responsible for communication were all overseas students. Ensure the quality of export products and services. Our company has a special quality department to check the quality of products, to ensure that the quality of products to meet customer requirements. Quality, efficiency and service are the most concerned issues of our company. We will try our best to meet customer requirements and timely communicate with customers in case of any uncertain factors to ensure that the products produced are as perfect as possible.

The tenet of Baoji Feiteng Metal Material Co., Ltd. is to maintain integrity and quality while producing efficiently and quickly, and share the results with customers for mutual benefit. We have been actively trying our best to provide the most efficient and convenient service, with low price and high quality to win the market welcome. This is how we win the trust of our customers and our business model.

If there is an opportunity, we will show you the advantages of our company, let us create considerable profits together, support and grow together. Since you trust our company's quality and service, I believe we will not let you down, give us an opportunity to give you a surprise. We sincerely hope to establish long-term friendly cooperation and business relations with your company.