The Opacity of Plastic Pipes and Fittings Tube Transmittance Tester
Application
It is mainly used to determine the opacity of pipes and fittings.
An ideal measuring device for pipe manufacturers, research and
inspection institution.
It consists of optical source, Luminous flux collection system,
automatic specimen going in/out controlling system, specimen
automatic moving device, specimen support, man-machine
communicating touch screen.
Meet standard:
GB/T 21300-2007, ISO 7686:2005 and the equivalent.
Features
1. Four samples can be tested at the same time, if less than four
samples can also be tested by selection;
2. The industrial touch screen with strong anti-interference
ability is used as the human-computer interaction interface, and
the operation process is simple and convenient;
3. It has the functions of automatic identification, positioning,
tracking and movement test for four samples and 12 measuring
points, which can realize automatic measurement.
4. Control mode is ARM core board control, automatic test process,
touch screen operation and display.
4. It has the functions of automatic analysis, recording, storage
and display.
5. It adopts grating automatic replacement system, which has the
function of automatically controlling grating movement, automatic
positioning and automatic tracking of samples according to sample
specifications.
6. luminous flux acquisition system: using high-precision optical
collector and 24-bit analog-to-digital conversion circuit.
Technical Parameters
| Pipe diameter range | Φ16～Φ40mm |
| Light wavelengthusing(LED energy-saving standard light source) | 545nm ± 5nm |
| Luminous flux resolution | ± 0.01% |
| Luminous flux measurement error | ±0.05% |
| Grating: 5 kinds of specifications | 16, 20, 25, 32, 40 |
| Automatic entry / exit speed | 384mm / min |
| Automatic entry / exit movement distance | 160mm ± 0.5mm |
| Sample tracking system moving speed | 420mm / min |
| Sample tracking system positioning accuracy | ± 0.1mm |
| Sample rack for | 16, 20, 25, 32, 40 |
