500 Kg/H Power 30 Kw Single Shaft Shredder For Scraps
Introduction of single shaft shredder
The single shaft shredder is mainly composed of blade spindle,
fixed blade, bearing box, box support, feeding system, hydraulic
pushing system, power system and electrical control system. It is
mainly used to tear up waste materials such as wood, rubber,
plastic and paper.
Specification of single shaft shredder
| Model | TMS-400 |
| Power | 15kw |
| Voltage | 380v/50hz |
| Capacity | 500kg/h |
| Speed | 50 r/min |
| Size | 1995*975*1900 mm |
| Weight | 1500 kg |
Features of single shaft shredder
1. It is suitable for tearing materials with strong winding, and a
small amount of light and thin metal objects are allowed in the
materials.
2. Low tool use and maintenance costs.
3. At the same power, the price is relatively low compared with
double shaft shredder, three shaft shredder and four shaft
shredder.
4. Convenient tool replacement.
5. The material size can be adjusted according to the size of the
screen aperture.
Working principle of single shaft shredder
The materials enter the shredding box through the feeding system.
The box carries the shredding blade. The pushing box pushes the
materials near the blade. The materials are shredded into small
pieces through the comprehensive effects of tearing, extrusion and
shearing of the shredding blade and discharged from the screen
hole.
After shredding by single shaft shredder
Instructions for use and maintenance of single shaft shredder
1. Before commissioning, strictly check whether the installation of
each part of the machine meets the requirements and whether the
screws and bolts are loose. At the same time, check the rotation
direction. It is strictly prohibited to crush flammable and
explosive articles to avoid accidents.
2. Uniform blanking shall be maintained during production to ensure
crushing quality and normal production. At the same time, motor
overload is strictly prohibited to ensure normal operation of the
machine.
3. In addition to frequently checking the fastening and looseness
of various parts, attention should also be paid to checking the
wear of vulnerable parts. If the wear is serious, it should be
replaced in time to avoid damaging the main parts. Fire prevention
measures shall be taken.
4. Due to the high speed, in addition to the correct and firm
installation, good lubrication shall be maintained to maintain the
normal operation of the machine. Generally, it is normal that the
bearing temperature does not exceed 70 ℃. Add butter and molybdenum
disulfide to the main engine bearing once a week, and the effect of
high-speed butter is better.
Application of single shaft shredder
The items that can be torn up by metal shredding machine are
(1). Wood processing industry: wooden pallets, branches, seats,
wood, roots; Wisconsin environmental protection.
(2). Plastic products industry: mixed plastics, plastic buckets,
rubber blocks, nozzle materials, garbage cans.
(3). Waste tire industry: automobile tires, tires with rough steel
wire removed, rubber.
(4). Metal recovery industry: scrap iron and steel, lead, aluminum
alloy, copper scrap.
(5). Electronic waste industry: electronic appliances, plugs,
transformers, air conditioners, induction cookers, television.
Equipment maintenance
1. Regularly check whether the connection of each connecting part
on the equipment is loose
2. Check the current of the main motor of the equipment regularly
3. Regularly check whether the hydraulic system is normal
4. Check the tool wear regularly
