HDD drill pipe wrench drill pipe drill pipe hydraulic clamp
Product introduction
This product is applicable to the threaded connection between
drilling tools of large and medium-sized trenchless directional
drilling rigs. Because the drilling tools are subject to large
torque for a long time, they have a great tightening force. For the
drilling tools unearthed on the opposite bank, it is difficult to
break out with a drill rig, and it is very difficult to break out
with a manual pipe wrench. If we use the hydraulic shackle pliers
produced by our company, it is easy to solve the problem, which can
greatly improve the construction efficiency, and win time for the
overall project. This product is cheap and practical, with
reasonable design, reliable quality and long service life. We hope
that customers can come to choose it.
operate
1. Install the two clamp arms on the male and female connectors
respectively, and they can rotate. The distance between the two
arms is 78/67mm.
2. Fix the two clamp arms on both ends of the retracted cylinder
with pins, and tighten the two lock nuts.
3. After refueling the oil tank (two-thirds of the oil tank), first
install the pressure rod and pressure gauge on the oil pump as
shown in the figure, and then connect the oil pump and the oil
cylinder with the oil pipe.
4. Set the high-pressure oil reversing handle to the extended
position of the cylinder, repeatedly press the pressure rod, the
pressure gauge will display the pressure, the cylinder rod of the
cylinder extends, open the two clamp arms, and the male and female
buckles are released.
| product name | Breakout Tong For Drill Pipe |
| Place of Origin | Hebei, China |
| Brand | BaiWei |
| Specification | XKQ114 |
| Rated torque KN.m | 40 |
| Rated pressure MPa | 30 |
| Clamping diameter mm | 78~123 |
| Locking female hexagon mm | 50 |
Advantage
1. Flexible and convenient to use, safe and reliable
2. Improve construction efficiency
3. Strong practicality
4. Easy to disassemble and install
5. Supply from source manufacturers
FAQ
Q: What is your delivery time?
A: It usually takes 20 days to produce. Within 3 days (if there is
stock).
Q: How to control the quality?
A: Before shipping, we should check and test each drill rod.
Q: Do you agree to order samples?
A: Yes, we welcome your sample order to test our quality.
Q: Has your drill pipe been heat treated?
A: Yes, our heat treatment of drill pipe and casing.
Q: Does your drill pipe have anti-rust function?
A: Yes, each drill pipe and casing will be anti-rust with paint or
anti-corrosion oil before transportation. If you need galvanized
pipe, please contact us.
