Conveyor Belt UV Curing Machine Drying Line LED Dryer
It is apply to the special effects such as wrinkle, frosted,
refraction gem crystal and convex oil on the bullion paperboard,
metal, glass, plastic, and also the UV curing of the offset
printing ink on the offset press production, screen printing, glue
coating drying.
Specification
Machine Size:
750*1500*1200MM
Irradiate Size;
200*100mm/cm2
Power:
AC220V/110V
Spectrum Range:
365NM
Belt Width:
300MM
Speed:
4m/min
Dissipation Mode
Water Cooling
Power:
1200W
Energy Uniformity:
>90%
Furnace Temperature:
>50
Net Weight:
90KG
Belt Material:
Teflon
Machine maintenance:
1. Clean the dust on the surface and keep the body clean. 2. When
starting the machine, check whether the fan and motor operate
normally and whether there is any abnormal sound. If there is any
abnormal sound, shut down the machine immediately and inform the
maintenance worker for maintenance. 3. After turning on the lamp,
check whether the UV lamp has been turned on. If it is found that
the UV lamp has not been turned on, inform the maintenance worker
for maintenance. Monthly maintenance of UV curing machine 1. Check
whether the vent is blocked and clean up the dust. 2. Check whether
the lamp current is normal and whether the circuit is aging. 3.
Check whether the fan and motor operate normally, and whether the
motor speed regulation can meet the working requirements of UV
curing machine. 4. Add oil to the drive chain and sprocket. 5.
Whether the light intensity of UV lamp can meet the working
standard, and whether the lamp is aging. 6. Clean the dust inside.
Half year maintenance of UV curing machine 1. Check whether the circuit and switch are normal. 2. Refuel the
motor gearbox. 3. The insulation of transformer shall not be less
than 5 megohm. If not, the transformer must be dried again. 4. Wipe
the reflector with soft rag and alcohol. 5. Whether the
transmission shaft and sprocket are loose, and whether the two
sprockets are vertical. 6. Whether the tightness of mesh belt is
appropriate
Dongguan Hongyu Automation Technology Co. Ltd locates in Chang' an
Town, Dongguan City, where is the"world factory"and famous town of
machinery,Building up by professional engineers of this
industry.always works on designing, producing and selling screen
printer, pad printer, hot stamping machine, heat transfer machine
and relative equipment. We' re good at making kinds of fully
automatic screen printing machine, pad printing machine,hot
stamping machine, heat transfer machine and providing professional
printing solutions.