14x51mm AR Cylindrical Photovoltaic Fuse 10 - 50A For Solar System Protection

14x51mm Photovoltaic Fuse Cylinder AR Cylindrical 10A 20A 30A 40A 50A for Solar System Protection

Description of 14x51mm Photovoltaic Fuse

Fuse:
A fuse is an electrical appliance that uses the heat generated by itself to fuse the melt and disconnect the circuit when the current exceeds the specified value. The fuse is based on the current exceeding the specified value for a period of time, the melt is melted by its own heat, thereby breaking the circuit; a current protector made by using this principle. The fuse is used in high and low voltage power distribution systems and control systems and electrical equipment, as a short circuit and overcurrent protector, is one of the commonly used protection devices.

Introduction:
The fuse is based on the current exceeding the specified value for a period of time, using its own heat to melt the melt, thereby breaking the circuit; a current protector made by using this principle. The fuse is used in high and low voltage power distribution systems and control systems and electrical equipment, as a short circuit and overcurrent protector, is one of the commonly used protection devices.

Specification of 14x51mm Cylinder Cylindrical Fuse

Features and Benefits of 14x51mm Solar System Protection Fuse

* Compact design;
* Low power loss;
* Excellent DC performance;
* Low arc voltage and low energy let-through(I²t).

Dimension of 14x51mm aR Cylindrical Fuse

Fuse Size

More About 14x51mm Cylinder Fuse

Transportation and Storage
* Avoid heavy weather attack and mechanical damage;
* Product storage Temperature: -40°C~120°C(-40°F~248°F)；
* Product storage Humidity: T=40°C RH≤70%, T≤30°C RH≤80%, T≤20°C RH≤90%;
* Package storage Temperature: -40°C~80°C(-40°F~176°F);
* Package storage Humidity: RH≤90%, condensation free.

Operating conditions
* Fuses can perform regularly under the flowing conditions without corrections;
* If over the regular operating conditions but still in allowable operating area, fuses may need corrections and extra consult.
If the operating conditions is not matching the allowable area, please contact our company for more applicability tests and analysis;
* Regular current flow should ≤ 75% of recommended rated current;
* Operating temperature: -5°C~40°C(23°F~104°F);
* Allowable operating temperature:-40°C~125°C(-40°F~257°F);
* Temperature correction factors: when below -5°C(23°F), low overload (L.O.) pre-arcing time will slightly extend, rated current will slightly increase;
* If operating above 40°C(104°F),rated current need extra corrections, factors: -Kt①.
Note①: Kt value has already considered the safety current allowance under regular operating scenarios.
The picture see the following derating curve.

Vibration and Shock Resistance
* High frequency vibration resistance:≧20g;
* High frequency vibration resistance can satisfy track transportation/ motor vehicles;
* Intense vibration and shocking conditions need more tests.

Maintenance and Safety Instructions
* To use insulating board if needed for preventing shorting out;
* Maintain facilities regularly, Dusting/Antioxidation/etc.;
* Replacing fuses if damaging facilities;
* DO NOT change fuses while loading unless MUST.

Dongguan Tianrui Electronics Co., Ltd. was founded in 2010. It covers an area of 5,000 square meters and has a monthly production capacity of 50 million pieces. We are committed to be a comprehensive circuit protection component manufacturer and solution supplier. We are specialized in the design, development, production and sale of over-current protection, over-temperature protection, and over-voltage protection. Our products are widely used in consumer electronics, automobiles, ships, communications, power supplies, power tools, new energy and other fields. Our products cover auto-fuse, auto-fuse holder, current fuse, current fuse holder, temperature fuse, SMD fuse, resettable fuse, circuit breaker, thermal switch and so on. our products meet international standards including UL,

UR,CSA,CUL,VDE,TUV,PSE,CE,CCC,ROHS certification etc.

Partners:

Our products not only sell well in mainland China but also in North & South America, Southeast Asia and many other countries and regions. Our company has independent development and design capabilities, plastic molding, and metal stamping departments, and is equipped with multiple automatic fuse production lines and testing equipment and strives to find the best raw material suppliers. As we always put the quality at the first place, we have built a complete quality assurance system, which is the guarantee of the safety and stability of each product. Meanwhile, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.

We are looking forward to the cooperation with you in the near future.