High Ring Stiffness Sewage/Drainage Corrugated Pipe Production Line
DN 300 - DN 3000
Stiffness SN 8, SN 12.5, SN 16
Pipe weight reduce 25-50%
Material cost reduce 30%
Compared with the traditional steel and concrete pipe, the plastic
pipe has big advantages, such as anti-corrosive, less leakage,
light weight and easy installation. But the serious disadvantage of
the plastic pipe is the low elastic modulus, e.g. polyethylene Ep
value is about 800 Mpa. This character makes the full plastic pipe
can not provide a high ring stiffness easily. Or, even we can
approach to the high ring stiffness by increasing the wall
thickness and material grade, but the expensive pipe cost is not
acceptable by most of end users. So before the developing of the
reinforced structure wall pipe, the full plastic pipe is mainly
used in the area of small and middle diameter ranges.
1) High ring stiffness
For normal buried sewage plastic structure wall pipe, its maximum
ring stiffness is difficult to over SN 8. But in new pipe,
stiffness can easily reach the surprisingly value of SN 8, SN 12.5
and SN 16, even higher if necessary. In other hand, thanks to
plastic properties, the plastic-steel-plastic composite structure
could against corrosion very well.
2) Saving Material Cost
Besides the enhanced performance, the other primary advantage is
that the new pipe can save material cost obviously. When pipe
diameter is over Dn1000, SRPCP can save the plastic materials
consumption nearly in 50% when compared with other plastic sewage
pipe in same stiffness.
