The Metal European Edge Network Iron Temporary Fall Protection
Fence with CE certification is a specialized safety solution
designed to meet the rigorous requirements of European workplaces,
where temporary edge protection is critical. Crafted from
high-quality network iron—an interconnected metal mesh
structure—this fence creates a robust physical barrier that
prevents falls from edges, including construction platforms,
scaffolding, rooftop perimeters, and industrial mezzanines. Its CE
marking ensures compliance with EN 13374, the European standard for
temporary edge protection systems, guaranteeing that it has
undergone rigorous testing for strength, stability, and safety.
This makes it an essential tool for businesses operating in the EU
or adhering to European safety protocols, providing reliable
protection in dynamic work environments.
At the core of this temporary fall protection fence is its network
iron design, a metal mesh structure that balances durability with
visibility. The iron is typically galvanized or powder-coated to
resist corrosion, ensuring longevity even in outdoor or humid
conditions, such as construction sites exposed to rain or
industrial facilities with moisture. The network pattern—composed
of welded or woven metal strands—creates small, uniform openings
that prevent tools, debris, or limbs from passing through while
allowing light and air to circulate. This design also enhances the
fence’s structural integrity: the interconnected mesh distributes
force evenly across the entire barrier, enabling it to withstand
impacts from workers, equipment, or wind without bending or
breaking. For temporary setups that require both flexibility and
strength, network iron is an ideal material choice.
The CE certification of this European Edge Network Iron Fence is
more than a label—it is a guarantee of adherence to strict safety
benchmarks. EN 13374 specifies requirements for temporary edge
protection, including minimum height (110cm), load-bearing capacity
(withstanding lateral forces of at least 0.5 kN/m), and resistance
to deformation. This fence meets or exceeds these standards: its
height ensures it blocks access to edges, its network iron
construction supports the required load, and its frame—often
reinforced with steel tubing—resists bending under pressure.
Additionally, the CE marking confirms that the fence has been
tested for compatibility with common temporary installation
methods, such as clamping to scaffolding or securing with weighted
bases. For European businesses, this compliance is non-negotiable,
helping avoid fines and ensuring a safe workplace.
As a temporary solution, this European Edge Network Iron Fence
prioritizes ease of installation and portability, making it
suitable for short-term projects or dynamic work zones. It features
a modular design, with panels that connect quickly via hooks,
clips, or sliding joints—no specialized tools required. This allows
workers to assemble or disassemble the fence in minutes, adapting
to changing edge configurations as a project progresses. The panels
are also lightweight enough to be transported by hand, though they
remain sturdy enough for safety: typically weighing 10–15kg per
panel, they strike a balance between portability and stability. For
projects like building renovations, event setups, or emergency
repairs, this quick-deploy design ensures edges can be secured
immediately, minimizing downtime and risk.
This temporary fall protection fence is versatile enough to adapt
to a wide range of European work environments, thanks to its
network iron construction and modular design. In construction, it
protects workers on scaffolding or open floors during building
phases. On rooftops, it secures edges during maintenance or solar
panel installation. In industrial settings, it can cordon off
temporary hazards, such as uncovered pits or machinery access
points. Its compatibility with various anchoring systems—including
weighted bases for flat surfaces, clamps for scaffolding, or ground
spikes for outdoor use—further extends its utility. Whether in
urban construction sites, rural infrastructure projects, or indoor
industrial facilities, this fence provides consistent, CE-compliant
protection.
Our Edge Protection Barrier Specifications
| Wire Diameter | Mesh Size | Height | Length | Post | Thinckness | Color |
5mm 6mm 7mm | 50*100mm 50*150mm 100*200mm | 1.05m 1.10m | 1.3m--2.6m | 48mm | 1.5mm 1.8mm 2.0mm | Yellow Blue Red Other RAL color |
When ordering in large quantities, you have the option of
imprinting the customer's logo and colors.Various matching
accessories are available to provide solutions for various on-site
situations.
Our Edge Protection Barrier Cases:
we offer a wide range of safety solutions to reduce on site
accidents. Our pioneering edge protection barriers prevent
employees from injury. Whether they are working at ground level or
on elevated platforms, we have a selection of building site edge
protection safety measures to make sure they are protected while
they work.
Our Edge Protection Barrier advantage
1. Our products are versatile and durable - made from high quality
materials, hot-dipped galvanized and manufactured to the highest
standards of finish!
2. Our products are highly modular and simple to operate and
install.One-touch installation! Very convenient and effective!
3. High development capacity for innovative smart solutions
customized to customer needs
4. Our fence panels are curved at the top and bottom, and are
uniquely designed to provide maximum strength and prevent excessive
bending of the net.
5. The uniformity of the installation allows for maximum
supervision and control, thus maintaining a high level of safety at
all stages of construction.
No items will fall apart to prevent loss.Convenient and effective
packaging for long term product storage and easy transportation
