≤ 100ml (single bag); ≤50 × 2 = 100 ml (double bag)/5kw/Roll
film/Automatic Pouch Packaging Machine(DXD-180D)
1.Description of the Automatic Pouch Packaging Machine
DXD-180D full-automatic horizontal bagging machine consists of
motor film release, bag forming, bag bottom sealing, middle
sealing, vertical sealing, servo bag pulling, cutting, bag opening
and filling, bag transfer, bag top sealing and other mechanisms.
Each cam on the main shaft is driven by the motor to complete the
coordinated action of each mechanism, and the position signal is
fed back by the encoder on the main shaft. Under the programmable
control of PLC, the function of film roll → bag forming → bag
making → filling → sealing → finished product conveying is
realized. Finally, it is packed or boxed manually.
The machine has reasonable design and novel appearance. It adopts
standard stripe sealing and changes the filler. It can realize the
automatic filling of powder, particle, suspending agent, emulsion,
water agent and other materials on the machine. The whole machine
is made of SUS304 stainless steel, which has good anti-corrosion
effect on highly corrosive materials. Plexiglass cover prevents
dust leakage, which is more environmentally friendly and
pollution-free.
2.Parameters of the Automatic Pouch Packaging Machine
| Productive Power | 40-60 bags / min (single bag)( 40-60) x2 = 80-120 bags / min
(double bag) |
| Applicable Bag Size | Single bag: 70 × 100mm (minimum); one hundred and eighty × 220mm
(max.)
Duplex bag: (70 + 70) × 100mm (min.) (90+90) × 160mm (max.) |
| Applicable Bag Type | Single Bag/Double Bag |
| Packaging Capacity | Routine: ≤ 100ml (single bag); ≤50 × 2 = 100 ml (double bag) |
| Roll Film Size | Inner Diameter: Φ 70-80mm Outer Diameter: ≤ Φ 500mm |
| Filling Precision | ±1% |
| Air Pressure | 840L/min |
| Power | AC380V 50Hz/6KW |
| Equipment Size | 3456×1000×1510mm(L×W×H) |
3.Features of the Automatic Pouch Packaging Machine
(a)More simple and efficient operating system and integrated
intelligent system make your operation easier and complete with one
click.
(b)Temperature control integrated module: real-time monitoring of
temperature changes, the operation is clear at a glance. So as to
effectively control the heat sealing mechanism, ensure the sealing
reliability and make the packaged products easy to use and
good-looking.
(c)Servo bag pulling system, specification replacement, one key
input, less packaging material loss.
(d)Weighing feedback system: the measurement adjustment tentacle is
available to reduce the waste of materials( This function is
optional)
(e)Schneider Electric System (PLC programmable controller,
man-machine interface, servo system, frequency converter, switching
power supply, etc.) is mainly configured for the whole machine.
Safer, more reliable, more efficient and environmentally friendly
(bring you more economic energy loss).
(f)Multiple safety protection (Shenshi color code detection, Japan
SMC vacuum generator, air source processor with air pressure
detection and power phase sequence protector) to ensure the
stability and reliability of equipment operation to the greatest
extent.
(g)In order to prevent sticking, bag sticking, material sticking
and other phenomena of hot block parts on the equipment after
long-term use, special spraying shall be adopted on the surfaces of
bottom seal, vertical seal, top seal and other parts to avoid the
above situations.
(h)Jinwang packaging is rooted in the agrochemical industry with
more than ten years of experience. The whole machine frame is made
of SUS304 stainless steel, with excellent corrosion resistance;
Plexiglass cover prevents dust leakage, which is more
environmentally friendly and pollution-free.
(i)All connecting rod parts of the machine are made of SUS304
stainless steel casting, which has strong firmness and no
deformation. Other manufacturers generally use welded connecting
rods, which are easy to break and deform.
(j)On the equipment, we have reserved connectors for powder, water,
viscosity, granule and other filling devices. At the same time,
software is also reserved for design. When users change the filling
device, they only need to install the connector and use the
function in the touch screen.
(k)The central control box is installed in the middle of the
equipment, which is beautiful, generous and convenient for
operation and maintenance. Workers do not need to run back and
forth during operation, which can effectively improve work
efficiency. In addition, it is equipped with an independent
operation button box, which has the functions of dose fine-tuning,
debugging and inching, and the operation is more convenient.
(l)When a roll of film is used up, there is no need to pull out the
remaining roll of film on the equipment. Just bond it with the new
roll of film on this device to continue to start up and reduce the
loss of packaging materials( This function is optional)
(m)An independent tearing mechanism is adopted, and the air
cylinder drives the cutter to move back and forth to achieve the
tearing effect. It is easy to tear and beautiful. Its use effect is
far beyond the hot block tearing, and a fragment collection device
is set on the tearing device( This function is optional)
