Automatic Horizontal Glass Washing Machine Flat Glass Washer and
Vertical Glass washing machine
Name application of Automatic Horizontal Glass Washing Machine
Automatic Horizontal glass washing machine for washing and also
drying of glass products, performs automatic washing of products
from two sides at the same time, via the upper and lower brushes.
The equipment must perform the following operations:
- Glass loading (Automatic from the processing line);
- Glass washing (Automatic);
- Glass drying (Automatic);
- Unloading (Manual).
- Requirements for compressed air.
Pressure – 6 bar.
Pressure-4 bar.
Water tank details►
The washing part in contact with water is made of stainless steel
Air knives detail ►
Two pairs of special stainless steel aluminum alloy air knife
configuration, strong wind, good air drying effect, with heating
system(with temperature control device, optional opening and
closing)
High quanlity profile detail►
Aluminum alloy assembled structure, no scrap concept, permanent
use,high efficiency, energy saving 70% efficiency
The fan detail►
The fan is equipped with air filter in the air inlet chamber, with
large air volume and good air drying effect,The whole fan box is
installed in the upper part of the workshop, with the air filter
screen on the side for easy inspection and cleaning
Technical parameters:
1. Maximum glass width: 2500mm (effective maximum: 2650mm)
2. Minimum glass specification: 400mm×400mm (limited to single row
on left and right sides)
3. Glass thickness: 3mm-25mm (digital display)
4. Speed range: glass thickness within 3-25mm Vmax=1-12m/min
5. Main drive, brush speed regulation method: frequency control
6. Table height :900±25mm
| Maximum glass width | 2500mm (effective maximum: 2650mm) |
| Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
| Glass thickness | 3mm-25mm (digital display) |
| Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
| Main drive, brush speed regulation method | frequency control |
| Table height | 900±25mm |
| Total power | 42KW(water-bearing wind heating: 15KW) |
| Water source | self-circulation, tap water (according to civil water standards)
and deionized water water supplement (deionized water equipment
shall be provided by the buyer) |
| Power source | 380V 50Hz |
| Dimensions (length × width × height) | approximately 6260*4800*3100 |
| Weight | 3940kg |
Glass washing machine used for cleaning and drying the upper and
lower surfaces of ordinary plate glass and high quality low-e
glass,it is composed of incoming segment, cleaning air-drying
segment and outgoing segment.
Origin of motor and main accessories:
| Main drive motor | Zhejiang province |
| Brush motor | Zhejiang province |
| High pressure air blower | Guangdong province |
| The water pump | Shanqing |
| brush | Anhui province |
| Rubber roller | Guangdong province |
| Frequency converter | VEICHI/Rexroth |
| Electric parts | Schneider |
Automatic Vertical Glass washing machine
Vertical Auto Industry Flat Glass Washing and Cleaning Machine
1. Overview of Auto Vertical Glass Washing and cleaning Machine
Auto Industry Flat glass washing machine is used for glass washing
for processing Double glazing glass.Auto vertical washing and cleaning machine can complete the following functions: pre-cleaning,
cleaning and drying of flat glass and low-e glass.It is in the
production of slot aluminum insulating glass. Glass washing machine
has the advantages of small occupation area, high efficiency,
reliable performance and convenient maintenance.
2.Advantage of glass cleaning machine
•Using 3Pair of soft brushes with 0.1mm soft hair, can wash low-e
glass
•Pre-washing (Optional)
•The air knife can automatically adjust the width of the air knife
according to the thickness
•New air knife uses aluminum profile (Duckbill Air Knife), the size
of the air outlet is adjusted by the aluminum profile duck beak.
This can reduce the number of adjusting screws, ensure that each
screw is not loose, and avoid the resonance of the air knife.
•European silencer system
•The operation box with washing speed display, can accurately
display washing speed (8-10m) •Water tank automatic temperature
control, water replenishing system
•Stainless steel material
3.Main feature of vertical glass washing machine
- Automatic vertical cleaning machine adopts Siemens control system,
which can freely adjust the cleaning speed of cleaning machine.
- Vertical Automatic washing machine can Wash online and offline
low-e glass, automatically recognizes Low-e film
- Vertical Automatic washing machine Using 6 pieces of soft brushes
- The pre-cleaning section adopts stepless frequency conversion speed
regulation, and the glass can run smoothly at the right speed.
- Water tank automatic temperature control, water replenishing system
Cleaning and water tanks are made of stainless steel and corrosion
resistant materials, and the transfer rollers are acid and alkali
resistant rubber rollers, which are automatically adjusted
according to the glass thickness.
- 304 stainless steel materials
- Automatic vertical washing machine Using intelligent intermittent
energy-saving working methods
- Automatic vertical washing machine adopt European silencer system
- The air knife can automatically adjust the width of the air knife
according to the thickness
- Automatic vertical washing machine Adopt variable frequency fan,
energy efficient, good cleaning effect
- Hierarchical type washing system
4. Tech Parameters of Vertical Glass cleaning and Drying Machine
| Power supply | Voltage(V) | 380 |
| Frequency (Hz) | 50 |
| Main power | kW | ≈35 |
| Washing speed | m/min | 1~7 |
| Max high speed | m/min | 10 |
| Min glass size | mm | 450×280 |
| Max glass size | mm | 2500×4000 |
| Glass thickness | mm | 3~15 |
| Roller height | mm | 500±20 |
| Total weight | kg | ≈3500 |
5. Detail of AutomaticGlass Washing Machine
