10 Layer Custom PCB Lead-free HASL HDI Printed Circuit Boards
Fabrication For Power Supply
What is a HDI PCB?
IPC-2226 defines HDI as a printed circuit board with a higher
wiring density per unit area than conventional printed circuit
boards (PCB). They have finer lines and spaces ≤ 100 µm / 0.10mm,
smaller vias (<150µm) and capture pads <400 µm / 0.40mm, and
higher connection pad density (>20 pads/cm2) than employed in
conventional PCB technology.
Company Brief Introduction
Abis Circuits Co., Ltd is a professional PCB manufacturer which was
established on Oct, 2006 and focus on double side, Multilayer and
HDI pcb mass production.
We have two factories together , the factory in Shenzhen is
specialized in small and middle volume orders and the factory in
Jiangxi is for big volume and HDI.
Product We Produce:
1. Rigid, Flex, Rigid-Flexible PCB.
2. Buried/Blind Vias, Via in Pad, Counter Sink Hole, Screw
Hole(Counterbore), Press-fit, Half Hole.
3. HASL lead-free, Immersion Gold/ Silver/Tin, OSP, Gold
plating/finger, Peelable mask,
4. Printed Circuit Boards adhere to IPC Class 2 & 3 international
PCB standard.
5. Quantities range from prototype to medium & big batch
production.
6. 100% E-test
Product Description
| Item | Production Capacity |
| Layer Counts | 1-20 layers |
| Material | FR-4,Cu base,High TG FR-4,PTFE,Rogers,TEFLON etc. |
| Board thickness | 0.20mm-8.00mm |
| Maximum Size | 600mmX1200mm |
| Board Outline Tolerance | +0.10mm |
| Thickness Tolerance(t≥0.8mm) | ±8% |
| Thickness Tolerance(t<0.8mm) | ±10% |
| Insulation Layer Thickness | 0.075mm--5.00mm |
| Minimum Line | 0.075mm |
| Minimum Space | 0.075mm |
| Out Layer Copper Thickness | 18um--350um |
| Inner Layer Copper Thickness | 17um--175um |
| Drilling Hole(Mechanical) | 0.15mm--6.35mm |
| Finish Hole(Mechanical) | 0.10mm-6.30mm |
| Diameter Tolerance(Mechanical) | 0.05mm |
| Registration(Mechanical) | 0.075mm |
| Aspect Ratio | 16:1 |
| Solder Mask Type | LPI |
| SMT Mini.Solder Mask Width | 0.075mm |
| Mini. Solder Mask Clearance | 0.05mm |
| Plug Hole Diameter | 0.25mm--0.60mm |
| Impedance control Tolerance | ±10% |
| Surface finish/treatment | HASL,ENIG,Chem,Tin,Flash Gold, OSP, Gold Finger |
Quotation from ABIS
To ensure an accurate quote, be sure to include the following
information for your project:
- Complete GERBER files including the BOM list
- Quantities
- Turn time
- Panelization Requirements
- Materials Requirements
- Finish requirements
Your custom quote will be delivered in just 2-24 hours, depending
on the design complexity.
Capability
| No | Items | Capability |
| 1 | Layer Counts | 1-20layers |
| 2 | Material | FR4, High TG FR4, PTFE,Cu base, Rogers, Aluminium base, etc |
| 3 | Maximum Size | 600mm x 1200mm |
| 4 | Board Outline Tolerance | ±0.10mm |
| 5 | Board Thickness | 0.20mm-8.00mm |
| 6 | Thickness Tolerance(t≥0.8mm) | ±8% |
| 7 | Thickness Tolerance(t<0.8mm) | ±10% |
| 8 | Insulation Layer Thickness | 0.075mm-5.00mm |
| 9 | Minimum Line | 0.075mm |
| 10 | Minimum Space | 0.075mm |
| 11 | Out Layer Copper Thickness | 18um-350um |
| 12 | Inner Layer Copper Thickness | 17um-175um |
| 13 | Drilling Hole(Mechanical) | 0.15mm-6.35mm |
| 14 | Finish Hole(Mechanical) | 0.10mm-6.30mm |
| 15 | Diameter Tolerance(Mechanical) | 0.05mm |
| 16 | Registration(Mechanical) | 0.075mm |
| 17 | Aspect Ratio | 16:01 |
| 18 | Solder Mask Type | LPI |
| 19 | SMT Mini. Solder Mask Width | 0.075mm |
| 20 | Mini. Solder Mask Clearance | 0.05mm |
| 21 | Plug Hole Diameter | 0.25mm*0.60mm |
| 22 | Impedance Control Tolerance | ±10% |
| 23 | Surface Finish | HASL, Lead Free HASL, Immersion tin, Immersion gold, Gold plating,
Immersion silver, OSP, etc. |
| 24 | PCB Package | Vacuum & Carton |
Lead Time
| Category | Quickest Lead Time | Normal Lead Time |
| Double sideds | 24hrs | 120hrs |
| 4 Layers | 48hrs | 172hrs |
| 6 Layers | 72hrs | 192hrs |
| 8 Layers | 96hrs | 212hrs |
| 10 Layers | 120hrs | 268hrs |
| 12 Layers | 120hrs | 280hrs |
| 14 Layers | 144hrs | 292hrs |
| 16-20 Layers | Depends on the specific requirements |
| Above 20 Layers | Depends on the specific requirements |
Delivery Time:
| Air Freight Lead Time – 4 Days |
| Sea Freight Lead Time – 30 Days |
| All Far East lead times are subject to customs clearance |
| Premium International shipments can be arranged by DHL, Fedex, UPS
or TNT at extra cost |
Workshop
Certificate
Abis with Customer
FAQ
Q1: How can I got quotation?
A: Please send gerber file with format: .PCB / .P-CAD / .DXP / .CAD / .Gerber
Q2: Do you have pcb in stock?
A: Most of our pcb board are customised, which according to gerber
file.
ABIS have sample in stock could sent to you for a quality checking
always.
Q3: What board manufacturer do you use for FR4?
A: Main Suppliers(FR4): Kingboard (Hong Kong), NanYa (Taiwan) and
Shengyi (China).
Q4: Will my PCB files be checked?
A: Checked within 12 hours. Once Engieer question and working file
checked, production will start.
Q5: What do you require in order to produce an assembly quotation?
A: Bill of materials (BOM) detailing:
a), manufacturers parts numbers ,
b), components suppliers' parts number (e.g. Digi-key, Mouser, RS )
c), PCBA sample photos if possible.
d), Quantity
Q6: Does ABIS CIRCUITS bevel gold fingers?
A: Yes. A standard 45-degree bevel, also bevel at 15 or 30 degrees
upon request. For multi-layer board, please ensure there is
adequate back set forthe bevels.
Q7: My assembly company need the PCBs as panelized, can you do this
for me?
A: Yes. We can panelize your circuits upon your request.
ABIS cares every your order even 1 piece
