PETG Sheet Extruders Furniture Board Laminating Making Machine PETG
Decorative Sheet Extrusion Line
1. Main Features of PETG Sheet Extruders Furniture Board Laminating Making Machine
(1) Thermoformability
PETG Sheet Extruders Furniture Board Laminating Making Machine with complex shapes and large stretch ratios. Moreover, unlike PC
board and impact-modified acrylic, this board does not need to be
pre-dried before thermoforming. Compared with PC board or acrylic,
its molding cycle is short, the temperature is low, and the yield
is higher.PETG Sheet Extruders Furniture Board Laminating Making Machine
(2) Toughness
The extruded sheet of PETG sheet is usually 15 to 20 times tougher
than general acrylic and 5 to 10 times tougher than impact modified
acrylic. PETG sheet has sufficient bearing capacity during
processing, transportation and use, which helps prevent cracking.
(3) Weather resistance
PETG Sheet Extruders Furniture Board Laminating Making Machine. It can maintain the toughness of the product and prevent
yellowing. It contains ultraviolet absorbers, which can be
co-extruded into a protective layer to protect the board from the
harmful effects of ultraviolet rays.
(4) Easy to process
PETG sheet can be sawed, die-cut, drilled, punched, sheared,
riveted, milled and cold-formed without breaking. Slight scratches
on the surface can be eliminated with a hot air gun. Solvent
bonding is also a normal operation. It is easier to process than
general acrylic, impact modified acrylic or PETG Sheet Extruders Furniture Board Laminating Making Machine
(5) Chemical resistance
PETG sheet can withstand a variety of chemicals and commonly used
cleaning agents.
(6) Environmental friendly
The PETG Sheet Extruders Furniture Board Laminating Making Machine, which meet the requirements of food contact management.
(7) Economy
It is cheaper than PC board and more durable than acrylic.
2. Models of PETG Sheet Extruders Furniture Board Laminating Making
Machine
| Type of machine | GWP75 Twin screw+GWS65 Single screw | GWP85 Twin screw+GWP52 twin screw | GWP95 Twin screw+GWP65Twin screw |
| Width of product | 800mm - 1000mm | 800mm - 1200mm | 1000mm - 1500mm |
| Thickness of product | 0.15mm - 2mm | 0.15mm - 2mm | 0.15mm - 2mm |
| Output | 300KG/H - 450KG/H | 500KG/H - 600KG/H | 800KG/H - 900KG/H |
| Type of machine | GWS90 single screw | GWS120 single screw | GWS150 single screw |
| Width of product | 600mm - 800mm | 800mm - 1200mm | 1000mm - 1500mm |
| Thickness of product | 0.15mm - 2mm | 0.15mm - 2mm | 0.15mm - 2mm |
| Output | 150KG/H - 200KG/H | 300KG/H - 400KG/H | 400KG/H - 500KG/H |
