Stainless Steel M8 Screw Hex Thread Probe NTC Thermistor High
Temperature Sensor
Thread Probe NTC Temperature Sensor
Screw size: M8
Probe material: Stainless steel
Wire length: 50-1000mm, or customized
Usage: Temperature Sensor
Paremeters of Thread Probe NTC Temperature Sensor
| Element | Screw Threaded NTC Thermistor Sensor |
| Probe size | Φ8mm, length=15mm |
| Sealed Material | Epoxy resin |
| Housing Material | Stainless steel |
| Wire length | On your request |
| Connector | C3, PH, etc |
| Special requirement | Waterproof, Antiacid, Anticorrosion, etc |
| Standard NTC | R25℃=50KΩ±1% |
| B25/50=3950K±1% |
| Operating temperature | -20~150℃ |
| Application | water heater,wall hanging stove,electric kettle, coffee maker, etc |
Description
Temperature sensor is made with high precision, reliable NTC
thermistor connected to high quality PVC cable, which is wrapped
with insulated, heat conductive and water resistant materials into
desired shapes, so as to facilitate long-distance temperature
measurement and control and installation.
Features
WATER-PROOF
Waterproof Stainless steel sheath
NO EXTERNAL COMPONENTS
Unique 1-wire interface requires only one port pin for
communication.
UNIQL JE STORAGE METHOD
Each device has a unique 64 bit serial code stored in an onboard
ROM.
Applications of TR-A11 M8 Screw NTC Temperature Sensor
1. Heater, Warmer, Automobile air conditioners, Refrigerators,
Freezers,
2. Water heaters, Gas boiler, Electric kettles, Wall-hung gas
boiler, Water dispensers,
3. Toaster, Microwave oven, Air dryer, Roasting pan, Induction
cooker, Electric hot plate,
4. Iron, Garment steamer, Hair straighten, Coffee maker, Coffee
pot,
6. Rice cooker, Incubator temperature control, Egg boiler, etc.
Specifications of Stainless Steel NTC Temperature Sensor
| Specifiation | R25℃=50KΩ±1% |
| B25/50=3950K±1% |
| Operating temperature | -20~150℃ |
| Application | b water heater, wall hanging stove, etc. |
| Specifiation | R25℃=100KΩ±1% |
| B25/50=3950K±1% |
| Operating temperature | -20~150℃ |
| Application | water heater,wall hanging stove, etc. |
| Specifiation | R25℃=10KΩ±1% |
| B25/50=3600K±1% |
| Operating temperature | -20~125℃ |
| Application | water heater,wall hanging stove,electric kettle, coffee maker,fish tank, etc. |
A thermistor is a type of resistor whose resistance is strongly
dependent on temperature, more so than in standard resistors. The
word is a combination of thermal and resistor. Thermistors are
widely used as inrush current limiters, temperature sensors
(negative temperature coefficient or NTC type typically),
self-resetting overcurrent protectors, and self-regulating heating
elements (positive temperature coefficient or PTC type typically).
An operational temperature range of a thermistor is dependent on
the probe type and is typically in between −100 °C (173 K) and 300
°C (573 K).
