0603 SMD Fuse Slow Blow 32V 63V SMT Fuse 0.25A 0.5A 0.75A 1A 1.5A
2A 2.5A 3A 3.5A 4A 5A 6A 7A 8A
Description
06.000 Series slow blow chip fuses help provide overcurrent
protectionfor systems using DC power sources up to 63vDC.
Help provide higher hold current inthe smaller footprint, improve
productreliability and quality, enhance high-temperature
performance in a widerange of circuit designs.
| Item | 0603 SMD Fuse |
| Standard | UL |
| Blow Type | slow blow |
| Body Material | ceramic |
| Fusing Material | alloy |
| Voltage Rating | 32V 63V dc |
| Current Rating | 0.25A 0.375A 0.5A 0.75A 1A 1.5A 2A 2.5A 3A 3.5A 4A 5A 6A 7A 8A |
| Mounting Type | Surface Mount |
| Size | 1.6x0.82x0.45 mm |
| Package | 5000pcs per reel |
Product Features
- Tiny Structure
- Rapid interruption of excessive current
- Compatible with reflow and wave solder
- Ceramic and glass construction
- One time positive disconnect
- Lead free and Halogen free material
- Tape and Reel for automatic SMT placement
Applications
- USB charger
- DVD players
- Laptops
- Portable electronics
- Digital cameras
- Game syste ms
- Cell phones
- LCDmonitors
- Printers
- Scanners
Operating Temperature: -55℃ to +125℃ (Consider de-rating)
Stored condition: at temperature of +10℃~60℃, relative humidity ≤ 75%.
A:Soldering pot temperature: 260℃ Max; Solder dwell time: <5s (Wave Soldering)
B:Solder Iron Temperature: 350±5℃, heating time: 1~2s. (Hand Soldering)
Specification
DC Interrupting Rating (Measured at rate d voltage, time constant
of less than 50 microseconds, battery source)
DC Cold Resistance are measured at<10% of rated current in
ambient temperature of 25degrees
Typical Pre-arching l2t are measured at 10ln Current
For fuse below 1A, the color of glass coating is Blue; for 1A and
above it' s Green
Drawing of the 0603 SMD fuse
Blowing time 0603 slow blow smd fuses
1206 & 1032 SMD fuses:
SMD fuses production machine
Standard Package:
1,500 pcs per reel
Shipping Term:
EXW, DDU, DDP, C&F, FOB
Shipping Methods:
International Express, By Air, By Sea
Selection of the Fuse and Holder Solution
The first step is to answer the following questions:
- Will the fuse need to accessible for replacement?
- How often will the fuse need to be replaced?
- Should the end customer of the appliance have access to change the
fuse?
- Should the fuse only be accessible from outside the appliance?
- How much is available to spend on safety and reliability?
5.1.2. Requirements and characteristics
The most important standards for fuse-holders, which specify
requirements, characteristics and testing methods are:
- IEC-publication 257 (1968) and Amendment no. 2 to this publication
dated January 1989.
- UL-standard no. 512.
Test Equipment
Q: Are you trading company or manufacturer ?
A: We are a fuse product factory.
Q: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock, 5-10 days if
the goods not in stock, according to the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
