Klixon Sensata 17AM Motor Thermal Protector Bimetal Thermostat
Temperature control switch
Product Description
The Sensata Technologies 17AM delivers the maximum protection in
the smallest package at an excellent price…
The KLIXON® 17AM Thermal protector prevents overheating, It’s a
miniature, snap acting, thermally operated device that is a proven
performer in protection technology. It protects against overheating
in:
• Shaded Pole Motor
• Permanent split capacitor motor
• Fluorescent lighting ballasts
• HID ballasts
• Transformer
• Recessed lighting fixtures
• Battery packs
• Vacuum cleaners
• Automotive accessory motors, solenoids,PC boards
• Other applications.
Features
• Miniature size.
• Individually temperature calibrated and checked.
• Positive make and break with KLIXON® snap action disc.
• Repeatable temperature performance over life.
• Gasket steel case suitable for many impregnation processes.
• Current and temperature sensitivity for maximum design
flexibility.
• Wide selection of leads and insulating sleeves.
• Same size and opposite side terminations.
• Cadmium free contacts
Contact Capacity | 125Vac18A for TCO 250Vac9A for TCO 250Vac1A for TBP |
| Temperature Range | 65°C to 160°C for TCO/TMP 65°C to 135°C for TBP |
Tolerance on Open Temp | +/- 5K, +/- 8K or +/- 10K |
Max. Temp. | 160°C |
Automatic Action | Type3C for motor Type2C for ballast Type2B for TCO |
Operating Time | Continuous |
Pollution Situation | Normal |
| Extent of Sensing Element | Whole Control |
| PTI for Insulation | 250 |
| Degree of Protection | IP00 |
| Electrical Connections | On winding, Inserting, Clamping, Bracketing or like |
Specification
17AM020A5 17AM 020 65℃±5℃
17AM021A5 17AM 021 70℃±5℃
17AM022A5 17AM 022 75℃±5℃
17AM023A5 17AM 023 80℃±5℃
17AM024A5 17AM 024 85℃±5℃
17AM025A5 17AM 025 90℃±5℃
17AM026A5 17AM 026 95℃±5℃
17AM027A5 17AM 027 100℃±5℃
17AM028A5 17AM 028 105℃±5℃
17AM029A5 17AM 029 110℃±5℃
17AM030A5 17AM 030 115℃±5℃
17AM031A5 17AM 031 120℃±5℃
17AM032A5 17AM 032 125℃±5℃
17AM033A5 17AM 033 130℃±5℃
17AM034A5 17AM 034 135℃±5℃
17AM035A5 17AM 035 140℃±5℃
17AM036A5 17AM 036 145℃±5℃
17AM037A5 17AM 037 150℃±5℃
17AM038A5 17AM 038 155℃±5℃
17AM039A5 17AM 039 160℃±5℃
Dimension & Structure
How it works?
The 17AM Thermal protector uses the same snap-action principle of
other KLIXON® protectors. The bimetal disc senses both heat and
current from the equipment which 17AM is installed on. When the
temperature of the disc reaches a predetermined calibration point,
the disc snap open the contacts, thus breaking the current path.
When the equipment returns to a normal operating range, the 17AM
protector resets (close circuit) automatically.
Please Note :
- During installation, the temperature switch should be completely
close to the mounting surface of the tested appliance.
- Do not collapse or deform the plastic / metal shell during
installation.
- For metal temperature controller, when using, do not remove the
insulating sleeve to avoid electric leakage. Not suitable for
working in water.
- Not suitable for air temperature sensing, only applies to contact
sensing.
What's the difference between N/C and N/O
Normally Closed: When the temperature falls to the reset temperature, the
thermostat contact can be connected again. (If the reset
temperature is not reached, the thermostat contact is also
disconnected)
Normally Open: When the temperature falls to the reset temperature, the
thermostat contact can be disconnected again. (If the reset
temperature is not reached, the thermostat contact is also
connected)
Standard Package
100pcs per bag, 20000pcs per carton
Shipping Term:
EXW, DDU, DDP, C&F, FOB
Shipping Methods:
International Express, By Air, By Sea
Selection of the Fuse and Holder Solution
The first step is to answer the following questions:
- Will the fuse need to accessible for replacement?
- How often will the fuse need to be replaced?
- Should the end customer of the appliance have access to change the
fuse?
- Should the fuse only be accessible from outside the appliance?
- How much is available to spend on safety and reliability?
5.1.2. Requirements and characteristics
The most important standards for fuse-holders, which specify
requirements, characteristics and testing methods are:
- IEC-publication 257 (1968) and Amendment no. 2 to this publication
dated January 1989.
- UL-standard no. 512.
Test Equipment
Q: Are you trading company or manufacturer ?
A: We are a fuse product factory.
Q: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock, 5-10 days if
the goods not in stock, according to the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
250Vac
