Salt spray corrosion test chamber
Introduction:
Salt Spray Tester is used to test the anti-erosion quality of the
surface of all materials after the rust-proof of painting, coating,
electroplating, anoding and rust-proof of greasing.anti corrosion
treatment for a variety of materials, corrosion resistance of their
products.
Corresponding Standard:
GB11158 GB10589-89 GB10592-89 GB/T10586-89 GB/T2423.22-2001
GB/T2423.1-2001 GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93 ASTM
D1735
IEC60068-2-1.1990 IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA -
364-31C
EIA - 364-59 ASTM B117
Product Features
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to
clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to
ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower
tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Packaging Dimensions: (WxDxH) 1610*1050*1400mm
Power supply source: single-phase, 220V±10%, 50Hz (can be
appointed)
Gross Weight: 150kg
HS Code: 8479899990
Specifications:
| Model | BT-60 | BT-90 | BT-120 | BT-160 | BT-200 |
| Inner size (cm) | 60x45x40 | 90x60x50 | 120x100x50 | 160x100x50 | 200x100x50 |
| External size(cm) | 107x60x118 | 141x88x128 | 190x130x140 | 230x130x140 | 270x130x140 |
| Inside temp | Brine test method(NSS ACSS)35°C±1°C/Corrosion resistance test
method
(CASS)50°C±1°C |
| Brine temp | 35°C±1°C 50°C±1°C |
| Test chamber volume | 108L | 270L | 600L | 800L | 1000L |
| Brine chamber volume | 15L | 25L | 40L | 40L | 40L |
| Compressed air pressure | 1.00±0.01kgf/cm2 |
| Spray volume | 1.0~2.0ml/80cm2/h (Collect at least 16 hours, the average) |
| Test room relative humidity | 85%RH or more |
| PH | 6.5~7.2 3.0~3.2 |
| Spray method |
Programmable spray (including the continuous spray interrupted
spray) |
| Power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A | AC220V1Φ20A | AC220V1Φ30A |
Details&Pictures
A.The body material
1. The box body and inner liner are made of imported PVC
high-strength corrosion-resistant plastic board, with smooth and
smooth surface, aging resistance and corrosion resistance; Easy to
clean, no leakage;
2. The box cover is made of imported PVC transparent plastic plate,
which is easy to observe the test condition of the test samples
during the test. The box cover and the box body are sealed with
water, so as to prevent the leakage of salt spray.
3.The design of large salt water tank, to prevent the lack of salt
water and interrupt the test;
4.Heating for tank heating and humidification, fast temperature
rise, temperature and humidity distribution uniform;
B.Heating system
1.The test temperature in the box is water jacket heating and
humidifying. The heater is made of U-shaped titanium alloy
high-speed heating electric heating tube.
2.Fully independent system, does not affect the salt spray test and
control circuit;
3.Temperature control output power are calculated by microcomputer,
to achieve high precision and high efficiency of electricity
benefits, low water level protection (prevent dry burning without
water);
C.Spraying system
1.The spray adopts tower-type sprayer (the height of the spire can
be adjusted), and four spray towers are placed in the box. Two salt
spray towers and two water spray towers are crossed respectively.
2.Spray gas for two-stage pressure regulation, oil filtration, gas
humidification preheating;
3.Atomized brine storage is built-in hidden type and storage
capacity is large, brine is equipped with preheating function;
4.Quartz brine filter element is equipped before brine atomization
to avoid the plug of impurities in the nozzle and stop the test;
5.All pipes in the test chamber are thickened fluorosilicone rubber
pipes, which can be kept without aging and cracking in ten years.
6.Salt water tank with high and low water level display;
D.Control system
7-inch 260,000 color LCD hand touch screen.
1.7-inch TFT true color LED LCD touch screen interface
2.The program capacity can be up to 100 groups, each program can be
freely linked to each other. Each program has multiple loop modes
3.24-bit high precision, full range of two decimal display,
accurate, without correction
4.Support Chinese/English interface switching, support fixed value,
program mode.
5.Support Chinese character input, input program name, and
manufacturer information.
Different options
PACKAGE&DELIVERY
OUR CERTIFICATES
BOTO ADVANTAGE
FAQ
Q1: How can i get a quotation?
A1: Kindly provide us your details request (inner chamber size,
temperature range, humidity range, power supply, product, etc.),
leave us an inquiry or email and we will response promptly!
Q2: What's your temperature & humidity range?
A1: Our standards temperature range is -70℃~+180℃, 20%~98%RH.
We also can do Ultra low temperature to -190℃ .
Q3: What's your rate of heating & cooling?
A3: Our standards rate is average 3℃/min for heating, 2℃/min for
cooling.
3℃/min,5℃/min,8℃/min,10℃/min,15℃/min linear or non-linear speed is
available for us.
Q4: What's your warranty?
A4: 12 Months (Noted: free spares parts can be offered during
warranty period, exclude consumables and man-made damages),
life-time technical service
