Low Profile Compression Force Transducer 2000N 1000N 500N Force
Sensor
Low Profile Compression Load Cell FCB-A utilizes strain gauge technology inteneded for both tension
and compression force measurement. Compact design, suitable for
force measuring applications where installation height is limited.
Low profile tension compression load cell FCB-A offers 0-500N /
0-1kN / 0-2kN three rated measuring ranges with mV/V output as
standard,0-5V or 4-20mA output is available through external
amplifier. Different force loading tools can be mounted to the M8*1
threaded hole located at the center of the force sensor for
different applications. Force transducer FCB-A is RoHS compliant
and CE certified, it can be modified or customized as per client's
request.
Dimensions(Unit in "mm")
Specifications
| Capacity | 500N / 50kg / 110lb 1000N / 100kg / 220lb 2000N / 200kg / 440lb |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 750±30 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum alloy |
| Cable | Ø4*2000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A load cell (or loadcell) is a type of transducer, specifically a
force transducer. It converts an input mechanical force such as
load, weight, tension, compression into another physical variable,
in this case, into an electrical output signal that can be
measured, converted and standardized. As the force applied to the
force sensor increases, the electrical signal changes
proportionally under constant excitation, thus the load/force can
be measured by measuring the output signal from the transducer. The
output range of FCB-A is normally within -25mV...+25mV(tension and
compression), signal amplification may be required for most
applications, a signal conditioner can be used to convert mV signal
into -5~5V, 0-10V or 4-20mA output for easy data processing. Taking
compression force load cell FCB-A-2kN working with amplifier
FSC(0-10V)-24V for example,the force-voltage relationship will be
compression force 0-2000N VS 0-10V output, 1V corresponds to 200N force, 5V output
corresponds to 1000N force,and so on.
Low Profile Compression Load Cell 2000N 1000N 500N Force
Measurement Transducer
Click here to download
datasheet
