1.5 Inch Flopetrol Cutter Wireline Fishing Tool
Flopetrol Cutter Wireline Fishing Tool
Ⅰ. Overview:
Flopetrol Cable Cutter,When downhole tools are stuck and cannot be
recovered, Use this tool to cut the steel wire or wire rope from the head of the rope
socket.
Ⅱ. Common specifications and technical parameters:
Size | OD | FN. | Applicable wire |
| 1.5＂ | 1.5＂(38mm) | 1.375＂ | 0.092＂,0.108＂,0125＂ |
| 1.875＂ | 1.875＂(47.6mm) | 1.75＂ | 0.092＂,0.108＂,0125＂ |
Ⅲ. Structural characteristics
1.The knotted or deformed steel wire will not be cut off
incorrectly, which can reduce the risk of misoperation.
2. The tool can effectively cut downhole wires or wire ropes at a
place (25mm) close to the head of the rope socket.
3. Replacing taper sleeve can cut wires or wire ropes of different
specifications, and can cut up to 1/4 "(6.4 mm) wire ropes.
4. The wire head can be bent after cutting the wire or the wire
rope, and the wire can be taken out together with the tool when the wire is pulled out.
ⅤI. Matters needing attention:
1.Unscrew the tool holder and punch out the straight sleeve. The
taper sleeve can be
2.changed as required. Pay attention to its positional relationship
when installing the blade and tool holder.
3. After use, clean up in time and maintain carefully to prolong
the service life of tools.
Welcome to contact us at any time.
