Thin Walled Wirefinder Wireline Fishing Tool 2 Inch Wirefinder Wireline Fishing Tool
I Introduction.
The Wirefinder is a wireline tool designed to locate and ball the
end of the wireline in the well bore during wireline fishing
operations. The Wirefinder is a one piece tool which has a standard
wireline fishing neck and threads uppermost and a slotted skirt
down.
II General Technical Parameters
| O D | FN | Connection |
| 1.75" | 1.187" | 15/16UN |
| 2" | 1.375" | 15/16UN |
| ￠51 | 1.375" | 15/16UN |
| 2.5" | 1.375" | 15/16UN |
| 3" | 1.75" | 1-1/16UN |
| 3.5" | 1.75" | 1-1/16UN |
| 4" | 2.313" | 1-9/16UN |
| 4.5" | 2.313" | 1-1/16UN |
| 5" | 2.313" | 1-1/16UN |
III Structural features:
1. Connect the wire finder to the tool string and go down the well.
2. When the tool is down to about 50 meters above the expected wire
position, it should be lowered slowly and
carefully observe the weight change of the indicator to determine
the position of the wire break.
3. After finding the position of the broken end, shake it down
slightly to bend the wire head slightly upwards, then
pull out the wire finder, and then enter the wire grab or the wire
spear to remove the wire.
IV Notes:
1. If the resistance is large when entering the wire finder, please
do not continue to shake downwards, so as to
prevent the wire from accumulating on the upper part of the seeker
and causing the tool string to jam.
2. Do not shake when passing through the safety valve, otherwise it
may cause the tool claw to break and cause
an accident.
3. After use, timely and careful maintenance to extend the service
life of the tool.
Tools can be manufactured to any size required . Welcome to contact us at any time.
