Electric Mill Roll Stand Corrugated Carton Box Making Machine
1. Cardboard transmit is vacuum suction method, with wind control
system.
2. Glue roller section is designed unit assemblage type. Whole
section can be moved by track, save maintenance time.
3. Universal joint drive, independent drive box body structure,
more stable transmission, enclosed gear oil lubrication, prolong
service life of the gear.
4. Upper corrugated roller, pressure roller bearings use
high-temperature grease lubrication.
5. The use of electric slurry insulation device, paste Department
operates independently in the host machine, prevent paste.
6. Electric adjustment, digital display of glue or manually adjust
the amount of adhesive.
7. The upper and lower corrugating roller are made of 48CrMo high
quality alloy steel, after heat-treatment. The hardness is
HRC58°-60°, the surface be grinded and chrome.
Main specification
| Model | 1600 |
| Working width | 900-1600mm |
| Speed | 80-100 m/min |
| Working air pressure | 0.6-0.9Mpa |
| Voltage | 380V 3PH |
| Power | 5.5kw |
| Weight | 2500kg |
| Size | 2.6*1*1.6m |
Feature
1 This machine adopts the wind adsorption to keep the stability of
flutes.
2 The corrugated paper is adsorbed to the middle corrugated roller
to form a negative pressure zone of 180°and then to finish the
rolling of corrugation through the vacuum box by fan.
3 The width of suction slot of lower corrugated roller is not more
than 2.6mm, able to reduce the stripe mark on single side
corrugated cardboard.
