3x95 MM Copper Conductor 15kv Power Cable Medium Voltage Power
Cables
Application:
The voltage range of medium voltage cables is between 6KV and 33KV.
Its practical life production applications include petrochemicals,
transportation, wastewater treatment, food processing, etc., and
are also important types of application cables.
Use characteristics:
The rated voltage U0/U of industrial frequency is 3.6/6kv～26/35kv.
Allowable working temperature of cable conductor: 90℃.
The temperature of the cable conductor at short circuit (time not
exceeding 5s) shall not exceed 250℃.
The ambient temperature when the cable is laid should be no less
than 0℃.
Cable bending radius: three-core cable is not less than 15 times
the outer diameter of the cable; single-core cable is not less than
20 times the outer diameter of the cable.
| Product name | Medium Voltage Cables |
| Certifications | CE/CCC/ISO |
| Standard | IEC60502-1 |
| Rated Voltage | 0.6/1 KV |
| Conductor material | Copper/Aluminum |
| Insulation Material | XLPE/PVC |
| Armoured Material | None/Steel Tape/Steel wire |
| Jacket Material | PVC |
| Number of cores | 1C,2C,3C,4C,5C,3+1C,3+2C,4+1C |
| Section area | 1.5MM2 - 400MM2 |
Cable selection:
The choice of cable mainly includes the choice of cable model and
the choice of cable cross section.
Model selection
The selection of the power cable type should be determined
according to factors such as environmental conditions, laying
methods, and special requirements of electrical equipment.
Generally, the following principles should be considered:
(1) Aluminum core cables should be used in general environments and
places, but copper core cables should be used in places with severe
vibration, special buildings and special requirements.
(2) Cables laid in the ground generally adopt armored cables with
outer sheath. In places where there is no possibility of mechanical
damage, plastic sheathed cables and lead (aluminum) sheathed cables
with outer sheaths can also be used.
(3) In the soil with chemical corrosion or stray current corrosion,
buried cables should not be used as much as possible. If it is
necessary to lay in the ground, use anti-corrosion cables.
(4) Cables laid in pipes or pipes generally use plastic sheathed
cables, but also bare armored cables.
(5) Cables laid in cable trenches or cable tunnels should not be
covered with flammable or prolonged flames. Generally, bare armored
cables, plastic sheathed cables and bare lead (aluminum) covered
cables are used.
(6) When cables are laid in places with large height differences,
plastic insulated cables, non-drip cables and dry insulated cables
should be used.
Cross-section selection The cross-sectional area of the cable
should be selected according to the following four conditions:
①Select according to heating conditions; ②Select according to
allowable voltage loss; ③Select according to mechanical strength
conditions; ④Select according to line protection (device)
equipment.
FAQ:
Q1. Are you trading company or manufacturer ?
A: We are professional manufacture with our own independent export
rights.
Q2. What if I don’t find the type and size of cable I need on this
page?
A: Don't worry. Contact us and send us your requirements, we will
help you choose the correct cable you need. It is better if you
have the following information: cable voltage, conductor material,
insulation and outer sheath material, armor type. Otherwise, you
can provide us with cable installation environment, application
requirements, etc.
Q3. Can you produce according to the samples ?
A: Yes, we can produce by your samples or technical drawings.
Q4. How long is you delivery time ?
A: Depends on your quantity, normally 1-3 weeks.
Medium Voltage Cables
