Solenoid manufacturers supply DC24V disabled electric wheelchair
electromagnetic valve push-pull round tube electromagne
Brand: DSN electromagnetic
Product Name: electric vehicle electromagnetic wire pusher
Product model: 3864s-1
Product voltage: DC24V, current: 0.7A, power: 16.9w
Product specification: the outer diameter is ф 38mm, 64mm long,
Product features: the electromagnet can be powered on continuously
for a long time, so the power consumption is low. This
electromagnet has the advantages of simple structure, low cost and
convenient installation.
Service life: more than 500000 times under rated working conditions
The parameters of spot finished products are as follows:
Product model Voltage electric current trip Initial suction Maximum
single power on time remarks
SM3864S-1-24V DC24V 0.7A 12MM 850gf It can be powered on for a long
time This model is a push structure, and other parameters can be
customized
Instructions for use and installation:
1. The power line of the electromagnet is powered on regardless of
the positive and negative wiring. The input voltage is DC24V, the
current is 0.7A and the power is 16.9w;
2. When the switch is powered on, the push head of the sliding rod
at the tail end of the electromagnet is pushed out for 12mm. After
power failure, the sliding rod is reset by the action of internal
spring force;
3. Schematic diagram of installation dimensions:
