Rain Test Chamber IPX34 Tests Of Protection Aging Water Oscillating Pipe

Rain Test Chamber IPX34 tests of protection againg water oscilating pipe

Sanwood IPX34 Rain Test chamber
SANWNOOD produce and supply rain spray test chambers of SM-IPX34 series according to the IPX3, IPX4 tests per IEC60529-2013 14.2.3 & 14.2.4.

IPX34 rain test chamber is suitable for the adaptability and reliability test of electrical and electronic products, materials, parts and components under rain and temperature conditions, and can also be used for external lighting and signal device and automobile lamp shell protection.

Depend on the specimen size, the oscilating pipe radius can be produced at: 200mm/400mm/600mm/800mm/1000mm/1200mm/1400mm/1600mm. Below the talbe shows the number of open holes and total water flow at different tube radius.

To run the IPX3, IPX4 rain spray tests, there are strictly requirement to the flow rate, the angle of water spray, test time and the distance from the sample to the spray nozzle per EN60529 or IEC60529 standards. Sanwood R&D will provide you professional test solution per specific.

Technical Specification

IPX3/4 Rain spray test chamber features
1. Meet the requirement of IEC / EN60529 standards IPX3 water spray test and IPX4 water splash test.
2. The test sample will be put or installed on the center of the half-round sinuous pipe and make the bottom of the test samples and the oscillating axis in a horizontal position. During test, the sample would spin around the center line.
3. Pendulum pipe standard configuration: R400mm and R600mm or other else. Swing pipe inner diameter: Φ15mm. DillΦ0.4 holes and make the water spray to the center. The water pressure of the device entrance is equal to 10m water level, spraying water pressure is 80-100kpa.
4. Water spraying pipe swing angle: 120º,180º,360º, Vertical sides: 60º,90º,175º.
Complete a swing(2*120º) time is 4S.
Complete a swing(2*360º) time is 12S.
5. Can manual default the test parameters, complete testing automatically shut off the water supply and
pendulum pipe Angle automatic zeroing and automatic eliminate seeper, avoid scale blockage needle tip.
6. Use Mitsubishi PLC, LCD panel test procedure control box, stainless steel curved pipe, alloy aluminum frame, stainless steel shell.
7. Servo drive mechanism, guarantee the pendulum pipe Angle of precision, the overall pendulum tube structure for hang a wall.


Product Catalog:
Rain Test Chamber IPX34.pdf

SANWOOD PRODUCTION

SANWOOD Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established.

OUR EXHIBITION

Our products upgrade constantly and our customers come portable batteries, power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric bicycles, electric tools, electric systems, solar, military, universities research and other technology industries fields.

CUSTOMER WITNESS

Products are exported to more than 60 countries, such as Russia, Singapore, the United States, Turkey, Denmark, Vietnam, India, Malaysia, Kazakhstan, Austria, Canada, etc.

SANWOOD CULTURE

Sanwood thrived little by little and aims to become the leading brand in the safety and reliability environmental test equipment industry all over the worldber.

Guangdong Sanwood Technology Co., Ltd, founded at 1995, with 25 years manufacturing experience, we are now engaging 100+ workers and 20+ engineers (structure, refrigerant, assembly, quality control, pre-tests), 2 production lines with facility 6,000+ square meters, monthly capability reaches to 120 units which makes annual production capability more than 1,000 units. Products cover the full range of battery cells, modules and packs or even the whole automobile to run the environmental reliability tests.

Achieved national high enterprise reward, certified with ISO9001:2015, ISO14001:2015 and CE certificate, our products are exporting to more than 60 countries and regions, cooperated with top manufacturers in the EV lithium-ion battery industry such as ATL, BYD, CATL, Envision AESC, Farasis, Lishen, Sunwoda, Svolt and major playes in the European markets.

Customer service is as important as product quality, we are planning to build our European sales & service center to further iron our instant and efficient after-sales services for our clients.

Sanwood, born to provide high quality products! Leave us a message or give us a call TODAY to propose you a tailored test solutions.