1. Products name:
Middle & heavy Strip thickness uncoiling Sheet cut to length
equipment, model :MA-(1~6)×1600mm
2. Introduction:
Middle thick plate cut-to-length line can meet customer’s request
of max line speed 40m/min by uncoiling & leveling a coil strip, and
then shearing the leveled flat strip to certain length of sheets.
This coil CTL line is especially suitable for CR, HR carbon steel
coils, GI, PPGI steel plates.
The plate cut-to-length line (coil CTL line) has one leveling
machine driven by DC or AC motor, and the length-fixing is by
encoder, shearing style is stop-shear.
The middle thick plate cut-to-length line fit steel coils with
thickness: (1~6mm, 2~8mm, 3-10mm) and changeable width, and length
of finished sheets depend on customer’s practical need.
3. Advantages & Characteristics for this coil CTL line:
High precision
Line speed can be up to 30m/min, 7-8pcs/min 2000mm Length sheets in
average;
Leveling precision: ±1mm/㎡;
Sheet length precision: ±0.5mm/m;
Sheet diagonal length precision: ±0.5mm/m;
4. Solutions:
Input material: CR, HR carbon steel coils, GI, PPGI steel plates.
Strip thickness: 1~6mm;
Strip width of coil CTL line: 600~1600mm, 800-2000mm, 1100-2500mm;
Leveling roller: Φ140;
Material of leveling roller: 40Cr, HRC56-58;
Power for leveling: 75KW/90KW DC motor + Eurothem 590 DC speed
control;
Cutting speed: (0~40) m/min, adjustable;
5. Main technical parameter:
| Model | Thickness | | Length | Leveling speed |
| MA-6 x 1600 | 1.0-6.0mm | 600-1600mm | adjustable | Max 40m/min |
| MA-8 x 1800 | 2.0-8.0mm | 1000-1800mm | adjustable | Max 30m/min |
| MA-10x 2000 | 3-10mm | 1000-2000mm | adjustable | Max 30m/min |
| Note: The data in the form just as reference according to general
ranges, we always design and make each thick plate cut-to-length
line (coil CTL line) according to each customer’s specific
requirements, so each customer can buy his own well-content line
from us. |
