CNC Processing Cemented Carbide Tool Heads YG8 YG10

CNC Processing Cemented Carbide Tool Heads YG8, YG10

CNC Processing Cemented Carbide Tool Heads are mainly tools that are fixed on the tool holder by welding or machine clamps for cutting operations. Because the product specifications are generally small, they are also called cemented carbide blades.

CNC Processing Cemented Carbide Tool Heads is one of the most commonly used carbide cutting inserts. According to specific grades, it can be classified into cast iron, aluminum, suitable for heat-resistant steel, high manganese steel, stainless steel and high-grade alloy steel.

Precautions for the use of cemented carbide blades
1. The structure of the welded cutting tool should have sufficient rigidity. The sufficient rigidity is guaranteed by the maximum allowable external dimensions and the use of higher-strength steel grades and heat treatment.
2. Cemented carbide blades should be fixed firmly. Cemented carbide welding blades should have sufficient fixation. It is guaranteed by the knife groove and welding quality, so it should be based on the shape of the blade and the geometric parameters of the tool.
3. Before welding the cemented carbide blade to the cutter bar, it is necessary to check the blade and the cutter bar. First, check that the blade supporting surface cannot be severely bent.

4. Reasonable selection of solder. In order to ensure the strength of the soldering, the appropriate solder should be selected. During the soldering process, good wettability and fluidity should be ensured, and air bubbles should be eliminated, so that the soldering and the alloy soldering surface are fully contacted, and there is no lack of soldering.
5. Correctly choose the flux for welding. It is recommended to use industrial borax. Before use, it should be dehydrated in a drying furnace, then crushed, sieved to remove mechanical debris, and set aside.

6. Select mesh compensation gaskets. When welding high-titanium and low-cobalt fine-grained alloys and welding long and thin alloy blades, in order to reduce welding stress, it is recommended to use thin slices with a thickness of 0.2-0.5mm or mesh aperture 2-- 3mm mesh compensation gasket is welded.

7. Correctly adopt the sharpening method. Because the carbide blade is brittle and sensitive to crack formation, the tool should avoid overheating or rapid cooling during the sharpening process, and at the same time, choose a suitable grit grinding wheel and reasonable grinding. Process to avoid sharpening cracks and affect the service life of the tool.

8. Install the tool correctly. When installing the tool, the length of the tool head extending from the tool holder should be as small as possible, otherwise it will easily cause tool vibration and damage the alloy sheet.

9. Correctly re-grind and grind the tools. When the tool is used to achieve normal bluntness, it must be re-grinded. After re-grinding, the cutting edge and the fillet of the tip must be grinded with oilstone, which will increase the service life of the tool. And safety and reliability.
CNC Processing Cemented Carbide Tool Heads Picture:

Specification

JINXING MATECH is a research and development, production, processing and sales of integrated, comprehensive refractory metal, precious metal material manufacturer.JINXING MATECH is an expert provider on the metal solution. Especially on the products such as Tungsten , Tungsten copper , Titanium , Zirconium, Vanadium, Hafnium, Sputtering Target , Nickel base alloy, Cobalt base alloys etc, products quality supplied according to ASTM , ASME , AMS , MIL , ISO , DIN and EN Standard which mainly used in Semiconductor, Petro-Chemical, Solor , Medical , Aerospace, Military industries.

So far JINXING MATECH's has attracted more than 50 countries customers in We mainly supply to the Market such as Canada, Sweden, Italy, Denmark, India, New Zealand , Mexico, South Korea , Netherland , Australia , India and Southeast Asia coutries sand many other countries and regions by reliable qualities, professional service and cost effective pricing. JINXING MATECH's production and inspection equipments include 100tons Hydraulic press, 20 tons Automation Controls Press, Vacuum Pressure Sintering Furnace , Electro-sparking wire cut machine ,powder metal Mixer, Granulation Drum, Hydrogen Sintering Furnace, Rochwell and Brinell hardness meters ,Metallocope , carbon and oxygen analyser etc.. JINXING MATECH's has 8,000 square meters construction area as well as two workshops ,JINXING MATECH people keep improving products quality and inspect the density, hardness and composition of finished products strictly, which ensures every product meets customers' requirements.

Technology Process

Strong manufacturing capabilities along with a full-scale R&D and test lab give us the ability to fully control all process of raw materials preparing, manufacturing, inspection, packing and delivery.

Our success is built on long-standing customer relationships, the quality of our sputtering targets and the level of technical and logistic services and sensitivity to economic, political and environmental issues. Within our organization, we are continually challenging our own performance.

All of our core technical team members have more than 10 years professional experience of both R&D and high volume manufacturing. Our business operations and logistics team is staffed with experienced professionals to provide friendly and timely support and services to our customers.

Quality Assurance

Special Metals Fabrication is an ISO 9001: 2015 accredited company. Our attitude to quality assurance means we are continually striving to improve our company and to ensure we are working to the highest possible standards.

Quality is a big part of every day at Special Metals Fabrication. Each service we offer has its own team of experts, making sure everything we offer complies within the standards we have set.