It is designed for 1/4"-1 1/4" pipe with 11-R die head.
Other size in option
We have 1inch, 2inch, 3inch, 4inch as well as 6inch pipe threaders.
Knowledge of Manual ratchet threaders.
Manual ratchet threaders, also known as manual ratchet pipe
threaders, are hand-operated tools used to create threads on pipes.
These tools are commonly used in plumbing, construction, and
maintenance applications where threading pipes is required. Manual
ratchet threaders are designed to provide a compact and portable
threading solution without the need for power or machinery.
Here's a general overview of how a manual ratchet threader works:
1. Select the appropriate tool: Choose a manual ratchet threader
that is compatible with the pipe size and thread specifications you
require. These tools typically come with interchangeable dies or
cutting heads to accommodate different pipe sizes and thread types.
Prepare the pipe: Prepare the pipe by cutting it to the desired
length and removing any burrs or debris from the ends using a pipe
cutter or deburring tool.
2. Insert the die: Choose the appropriate die or cutting head for
the desired thread size and pitch. Insert the die into the manual
ratchet threader, making sure it is securely in place.
3. Secure the pipe: Use a pipe vise or pipe-holding device to
secure the pipe in place during the threading process. Ensure that
the pipe is aligned properly and firmly clamped.
4. Lubricate the pipe: Apply cutting oil or lubricant to the pipe
and the die to reduce friction and facilitate the threading
process. This helps extend the life of the cutting tools and
improves thread quality.
5. Position the tool: Position the manual ratchet threader over the
pipe, aligning the die with the end of the pipe.
6. Begin threading: Engage the ratchet mechanism of the tool by
turning the handle or lever in a clockwise direction. Apply steady
pressure and rotate the tool in the same direction. The die will
cut into the pipe, gradually forming the threads as you rotate the
tool.
7. Reverse and clear chips: After a few turns, reverse the
direction of the ratchet to clear any chips or debris from the die.
This helps maintain cutting efficiency and prevents the die from
getting clogged.
8. Continue threading: Repeat the threading process, alternating
between clockwise and counterclockwise rotations to clear chips and
maintain cutting effectiveness. Apply cutting oil or lubricant as
needed to ensure smooth operation.
9. Complete threading: Continue threading until the desired length
of threads is achieved. Monitor the cutting process and adjust the
pressure and cutting speed as necessary.
10. Inspect the threads: Once the threading process is complete,
inspect the threads to ensure they meet the required
specifications. Check for proper depth, pitch, and smoothness of
the threads.
It's important to note that the specific steps and operation of a
manual ratchet threader may vary depending on the tool design and
manufacturer. Always refer to the manufacturer's instructions and
follow proper safety precautions when using any tools or equipment.
