Features of High Efficient GMP Standard Titanium Dioxide Spin Flash Dryer/
Drying Machine
(1)Different feeding devices are available for different materials
to make sure the feeding process smooth and stable.
(2)The water cooling system is equipped at the bottom of drying
chamber to protect the material from deterioration under high
temperature condition.
(3)The special pneumatic seal device and cooling device can
considerably extend the service life of the shaft and driven
system.
(4)The special air disperser can considerably increase the swirl
air flow.
(5)The drying chamber is equipped with classification ring and
whirl plates which can respectively control the size and moisture
of the final products.
(6)The high speed of the swirl air flow inside the drying chamber
can considerably reduce the drying time and protect the thermal
sensitive material from sticking to the inner wall and
deterioration. It is compact and high efficiency.
(7)The blower at the bottom of the drying chamber can generates
strong air flow at the speed of 50-60m/s to protect the particle
from entering into the hot air pipeline.
(8)The disintegrator is cooled by water jacket to protect the
material from sticking to the inner wall because of high
temperature.
Principle of High Efficient GMP Standard Titanium Dioxide Spin Flash Dryer/
Drying Machine
The heart of the process is the drying chamber where the feed
disintegration and evaporation take place. The hot air with
suitable spray speed is introduced into the drying chamber through
air disperser at the bottom of the drying chamber which generates
swirl air flow. Meanwhile the material will be feed into the drying
chamber and drop onto the high speed rotating disintegrator, a
series of rotating blades that impact the material, and cut into
small particles. With the impact of swirl air flow and rotating
disintegrator, the swirl air flow conveys the particles and moves
to the top of the drying chamber. During the mixing and heat
transfer between the hot air and particle products, the moisture
will be evaporated in seconds. For those big lumps which are not
easy to dry will be dropped onto the disintegrator and re-grinded
for drying. The dried particles and spent drying gas exit the
drying chamber through the outlet at the top of the chamber. The
outlet is connected with cyclone and bag filter for dust removing
process. The products will be collected at the bottom of the
cyclone and the waste gas will be exhausted into the air after been
filtered by bag filter.
Technical Parameters of High Efficient GMP Standard Titanium Dioxide Spin Flash Dryer/
Drying Machine
Picture of High Efficient GMP Standard Titanium Dioxide Spin Flash Dryer/
Drying Machine
After Sell Service
Service before sell:
----Provide relative technical data for help equipment selection
----Running pilot test
----Offering advice for equipment selection, material analysis
----Provide flow chart, basic drawing
----Provide technical design
Service in sell:
----Provide factory layout according to contract
----Manufacturing ordered equipment according to the related
standard
---- A presentation report of manufacturing situation will be
offered every 15days
---- Tracking and supervising in whole manufacturing and
transporting period according to the contract requirement
---- Photo of wooden case will be offered, wooden case with
standard shipping marks.
---- Photo of freight loading will be offered.
---- A record of detailed delivery list will be offered
---- A record of detailed freight loading list will be offered
---- All of wooden case will be marked serial number, all of
attachments will be marked serial number, convenient for client's
clearing
Service after sell:
----Send service engineer for help instruct installation.
----Send service engineer for running test at site and training the
operator
----Help client for maintenance and repair
----Provide one year spare part
----Quality warranty for two years after sell
Packing & Delivery
