20Khz Ultrasonic Metal Spot Welder For Battery Nickel Pole Ear Terminal Electrode

20Khz High Power Ultrasonic Metal Spot Welder For Battery Nickel Pole Ear Terminal Electrode

20Khz Ultrasonic metal spot welder for Battery Nickel Pole Ear Terminal Electrode

Parameter

Description

The ultrasonic spot welding welding system is a set of split ultrasonic metal welding system composed of generator, control box, touch screen, frame, transducer, amplitude modulator, welding head, base, tooling and mold.

Ultrasonic metal welding is a special method that uses mechanical vibration energy of ultrasonic frequency to connect the same or dissimilar metals. When metal is ultrasonically welded, neither electric current nor high temperature heat source is applied to the workpiece, but under static pressure, the mechanical energy is transformed into internal energy, deformation energy and limited temperature rise. Solid phase welding occurs when the two base materials reach the recrystallization temperature. Therefore, it effectively overcomes the spatter and oxidation caused by resistance welding. Ultrasonic metal welding machine can perform single-point welding, multi-point welding and short strip welding on thin wire or sheet materials of non-ferrous metals such as copper, silver, aluminum, and nickel. It can be widely used in the welding of thyristor leads, fuse pieces, electrical leads, lithium battery pole pieces, and tabs.

Ultrasonic metal welding uses high-frequency vibration waves to be transmitted to the metal surface to be welded. Under pressure, the two metal surfaces are rubbed against each other to form a fusion between molecular layers.
The advantages are fast speed, energy saving, high fusion strength, good electrical conductivity, no sparks, and close to cold processing; the disadvantages are that the welded metal parts cannot be too thick (generally less than or equal to 5mm), the welding point cannot be too large, and it needs to be pressurized.

Features

1. Welding without sparks, environmental protection and safety.
2. The welding material does not melt, and the metal is not fragile.
3. Low requirements on the welding metal surface, both oxidation and electroplating can be welded.
4. Ultrasonic welding time is short, without any flux, gas, solder.
5. After welding, the conductivity is good, and the resistivity is extremely low or nearly zero.

Application

1. The wires are fused to each other, and one or more wires are fused to each other.
2. Ni-MH battery Ni-MH battery nickel mesh and nickel sheet mutual fusion and nickel sheet mutual fusion.
3. The wires are fused with famous electronic components, contacts and connectors.
4. Lithium battery and polymer battery copper foil and nickel sheet are mutually fused, and aluminum foil and aluminum sheet are mutually fused.
5. The sealing and cutting of the ultrasonic metal tube can be water-tight and air-tight.
6. Large heat sinks, heat exchange fins, bee
Mutual melting of nest hearts.
7. High current contacts such as electromagnetic switches and non-fuse switches, and mutual fusion of dissimilar metal sheets.

R-Responsibility P-Products S-Service

sale the right products instead of the expensive one

Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrasonic industry for more than 5 years and have rich experience in ultrasound. The company's business philosophy is: Do not blindly promote any product, find the right product for the customer. So before each order, we will confirm all the details, including application details, equipment conditions, equipment specific information.

And we have the Professional import and export company， HangZhou LanBen Trade Co., Ltd, can export to any country wordwide.

Before year 2012, we only sale second branson / dukane / rinco / herrman/telsonic welding equipment , during these twenty year develop, we find, more and more people have problem with the core part of ultrasonic welding equipment -generator and transducer, so we decided to start our business of transducer and generator of our own transducer and generator. Many of the end user meet the transducer problem, they don’t know why transducer broken, and changing the expensive transducer one by one. Actually, one branson /dukane /rinco transducer can use 10~30 year, even the cheapest transducer can use about 5 years. So there must some reasons if your transducer broken in one year. That’s why we want build Rps-sonic, we need to help more end user to know more about transducer , to use ultrasonic equipment better, to save cost when meet problem.

The same to generator, Unreasonable operation may shorter the use-life of ultrasonic generator. So we have to make technical inquiry before operate ultrasonic welding machine. The key point of ultrasonic machine is resonance, only keep every part in resonance can make the system in best work environment.

Till now , we still have a lot of Branson /dukane/ rinco/ herrman telsonic welding machine, so that we can confirm every transducer/generator we made can matching to the original machine.

Of course we can make the transducer/generator replace for Branson /dukane/ rinco/ herrman telsonic welding machine, we can also make transducer/generator for any application of your ultrasonic equipment. We supply OEM service for oversea customers, we already have OEM customer in USA and German.

If you have any problem in ultrasonic area, welcome contact Rps-sonic.