Built-In White Lamp Water-Proof 1 Minute Duty 220V AC Magnetic Yoke
Mag Particle Testing Equipment
General
HUATEC Group is well-known brand in exporting and manufacturing of
Magnetic Particle Testing Unit to overseas markets. This series of products are mainly used for the ferromagnetic
material, weld and mechanical components of the magnetic particle
testing. Probes using high-quality silicon steel, metallurgy and
low loss ratio, adjustable magnetic pole head and the whole plastic
shell such programs, which product has novel design, strong
suction, voltage wide, multi-functional, and generalization
characteristics. According to technical conditions, by using the
voltage and control requirements to make series of products
classify supply.This method enables to easily and rapidly detect surface flaw of
forged products or welding, part, etc
Features
• Can achieve the best inspection effciency by HCDX-220
• Can form a strong manetic field with a VAC or DC type
• Can apply dry, wet and fluorescent magnetic particles inspection
(MPI)
• Excellent durability by using a molding type of rubber material
with strong water-proof, shock resistance
• Can test various objects to be tested by connecting middle poles
Main Parameter
| Product Name | Handy Yoke Flaw Detector |
| Type | HCDX-220 |
| Rating Voltage | AC220V 50 |
| Magnetization kind | Communion magnetization |
| Flat pole head suction | Above 6Kg |
| U shape head sensitivity | Use No.2 Magnetic indicator test, magnetic marks show clear |
| Magnetic head polar distance | 10-200mm adjustable |
| Size and weight | 170×150×50mm 2.5Kg |
| Power | Single-phase 220V-240V |
| Mostly use | For the flat weld, fillet weld, special Weld Inspection |
| Socket type | P20J6A |
| Button switches line No. | 2,3 |
Standard accessories
1. Handy Yoke Flaw Detector HCDX-220 1pc
2. Power cable 1pc
3. Operation Instruction 1pc
4. Quality certificate 1pc
Principles of Magnetic Particle Testing
When the material or part under test is magnetized, discontinuities
which lie in a direction generally transverse to the direction of
the magnetic field will cause a leakage field to be formed at and
above the surface of the part.
The presence of this leakage field and therfore the presence of the
discontinuity is detected by the use of finely divided
ferromagnetic particles applied over the surface, some of these
particles being geared and held by the leakage field.
The magnetically held collection of particles forms an outline of
the discontinuity and indicates its location, size, shape and
extent.
Note
1, There should plus a small amount of lubrication on the pin
joints before use.
2, Pressing the switch only after probe pole head to maintain good
contact with the workpiece, switch should be released in time after
probe leave workpiece. Avoid overheating failures which caused by
improper operation of equipment.
3, HCDX-220 type power cable, such as configuration leakage
protection plug, leakage protection function of plug should be
checked if it normal before using.
4, When the user configuring HCDX-220 probe with main unit which
from other manufacturers, should check the compatibility of the
voltage and wiring
5, Lead section which connected to probe should not less than 0.75
square mm
