1050 1060 1100 3003 5052 5083 5086 6061 Aluminium Checker Plate Sheet 2400 X 1200 X 1.4mm

Aluminium Black Checker Plate 2400 X 1200 X 1.4mm

our Aluminium Tread Plate (or Checker Plate) is a black powder coated sheet with a regular diamond pattern on one side. Our black aluminium plates commonly used for caravans, trailers or to make tool boxes, kick plates, trailer flooring, wheel guards, feature paneling, boot liners, shelves and much more.

Aluminium checker plate is most commonly stocked and sold in alloys 5052, 3003, 1060 and 6061. Alloy 5052 has good corrosion resistance and strength, and is sometimes referred to as “Marine Grade Aluminium”, and is used in the transport industry among many other applications. While alloy 3003 is commonly used for the manufacture of bright finishes with propeller or diamond shaped lozenges.

Aluminum checker plate is made by the semi-continuous casting, hot rolling and cold rolling of aluminium ingot. It is during the cold rolling operation where the checker or tread pattern is embossed onto one side of the coil during the final rolling operation. The rolls used to produce the pattern are expensive and made in unique sets. The height of the tread or lozenge is determined by the etching depth of the pattern into these finishing rolls.

Checker plate is used for many varied applications including; transport industry including rail, marine, trailers, trucks, offshore and tool boxes, kick boards, shop fronts, roofing and architectural decorative uses. Whilst it is aesthetically pleasing and functional in many applications, care should be taken to ensure this product meets all the design requirements, including; spans, thickness/load limits, slip rating and environment considerations.

SPECIFICATIONS:

• Size: 2400 x 1200 x 1.4 mm
• Material: Aluminium
• Colour: Powder Coated Black (One Sided)
• Aluminum Grade: 5052

FEATURES:

• It is used for tool boxes, ramps or anything that requires an ultra-hard wearing property
• Not suitable for bending

Specification of aluminium checker plate:

Properties of aluminum checker plate

According to the different classification of aluminum sheet alloy

1) the general aluminium checker plate: 1060 aluminum checker plate for the plate able to adapt to the normal environment, it has low prices. Usually used in cold storage, flooring and packaging.
2)Al-Mn alloy aluminium checker plate: 3003 as the main raw material processing, also known as rust-proof aluminum, the strength is slightly higher than the ordinary aluminum checker plate, with a certain anti-rust properties, but the hardness and corrosion resistance less than 5000 series of aluminium checker plate, so the product is not strictly used in the anti-rust, such as truck models, cold storage floor.
3)aluminum-magnesium alloy checker plate: 5052 or 5083, such as 5000 series of aluminum as raw material processing, with good corrosion resistance, hardness, anti-rust performance. Usually used in special places, such as ships, cars lights, humid environment, the high hardness of aluminum, a certain load-bearing capacity.

Features of aluminium checker plate 6mm:

Anti-skid. It is benefit from the raised surface of the checker plate.
Anti-corrosion and rust. The aluminum and galvanized material can help the checker plate from the corrosive and dusty environments.
Anti-high temperature and alkaline.
Decorative. The bright surface, especially the polished aluminum checker plate has outstanding decorative affection.
Easy to install and economical. They are one-piece structure and lightweight, we can install them with few people and less cost.

Application of alum checker plate:

Floor Covering for hygiene and slip resistance.
Wall and column protection to prevent impact damage where hand trucks, trolleys, sack carts are operated.
Door protection as kick plates or as a full door cladding.
Commercial vehicle and vans.
Access ramp covering for wheelchairs.
Livestock trailer tailgate ramps and flooring.
Land rover and other off road vehicle body protection, bonnets, wings, sills, corners, floors, bumpers, mud flaps, door plates, side plates, load area plates.
Truck Bed Tool Boxes.
Stair treads, step ladders, walkways.
Shop front facial for vandal protection.

Producing Line of aluminium checker plate sizes:

we have one 1+2 hot rolling production line, six 2450mm, 2050mm, 1650mm, 1450mm cold rolling lines, two 1650mm foil rolling production lines, two 1850mm continuous rolling production lines and one roll coating production line. These equipment enables us to provide quality checkered plates products for our customers.

Hebei Qijie Wire Mesh MFG Co., Ltd. is located in Anping county, Northern China, which is famous as "the hometown of wire mesh" in the country.

The company was founded in 1999 with a registered capital of 500,000 US dollars, covering 40,000 square meters, has 3 plant areas, 22 stainless steel woven mesh machines, 28 welded wire mesh machines, 11 double twisted hexagonal gabion baskets machines, 8 cutting and flattening mesh machines, and 2 automatic PVC coating lines. Qijie does sales both home and abroad with annual amount of more than $ 20 million, the main products are stainless steel fly screen mesh, fence panels, gabion baskets, woven screening mesh, welded wire mesh, expanded metal mesh, perforated metal and various wire products.

Our main aim is to ensure customer satisfaction by providing superior quality products at reasonable prices. We use meticulous quality control procedures and analysis in order to ensure our products meet the international standards. A combination of competitive prices, on-time delivery and quality guarantee will make us our customer's best choice.