Use :This machine based on BIFMA X5.1, BIFMA X5.4 & BIFMA X5.9:
-Chair – vertical backrest, tablet, foot rest, arm durability for
multi seating, structural durability
-Cabinet- leg/glide assembly strength test
Standard :
- BIFMA X5.1 , BIFMA X5.9
- Chair -Vertical backrest , tablet , foot , rest, arm , durability
for multi-seating, structural durability , dan tilting durability .
- Cabinet - leg/glide assembly strength test
- BS EN 1728 , BSEN 1725 , BS 1730
- Chairs , Desk ,Bed .
Video , click here
Technical specifications
This machine use for apply load on vertical and horizontal on chair
and cabinet with variety size. It is need to fulfill minimum needed
as follow:
a)Frame
-6 vertical post – 4 fixed, 2 adjustable position along the frame
length (3m) to hold horizontal cylinder
-5 horizontal cross bar – 4 fixed, 1 adjustable position along the
frame length (3m) and height (2m) to hold vertical cylinder,
-Adjustable position& height
b)Size: 2m x 3m x 2m(H)
c)Type of cylinder: double-acting cylinder
d)Maximum force:2000Newton
e)One(1) unit horizontal Cylinder:
-To apply a horizontal force for tilting and legs/glide tests
-Attached to the pulley system (adjustable & removable )
-Adjustable height (500-1800mm) & horizontal position (along the
frame length, 3m)
-Stroke length :500mm
f)1 unit vertical cylinder:
-To apply a vertical force for back rest, tablet and arm rest tests
-Adjustable position along the cross bar (2m)
-Stroke length: 500mm
g)Voltage : single phase AC 220V, 50/60Hz
h)Compress air : 6 kg /cm²
i)Control panel
-ON/OFF button
- Load display
-Cycle display- 6 digit
-Force holding time: one(1) minute (strength test)
