FSM330~FSM340P72 (330W/335W/340W) Typical 72 Cells Poly Crystalline
Solar PV Module
Electrical Characteristics under STC (STC: Irradiance 1000W/㎡, Cell Temperature 25℃, Air Mass 1.5)
| Module Type | FSM330P72 | FSM335P72 | FSM340P72 |
| Maximum Power-Pmax (Wp) | 330 | 335 | 340 |
| Voltage at Maximum Power-Vmp (V) | 37.7 | 37.9 | 38.1 |
| Current at Maximum Power-Imp (A) | 8.75 | 8.86 | 8.92 |
| Open Circuit Voltage-Voc (V) | 46.3 | 46.5 | 46.6 |
| Short Circuit Voltage-Isc (A) | 9.45 | 9.55 | 9.64 |
| Module Efficiency-ηm (%) | 17.0% | 17.3% | 17.5% |
| Operating Temperature | -40℃ to +85℃ |
| Maximum System Voltage | 1000V/1500V DC (IEC) |
| Power Tolerance | 0~+3% |
| Temperature Coefficients of Pmax | -0.40%/℃ |
| Temperature Coefficients of Voc | -0.31%/℃ |
| Temperature Coefficients of Isc | 0.04%/℃ |
Mechanical Characteristics
| Cell Type | Poly Crystalline 157×157mm |
| No. of Cells | 72 (6×12) |
| Dimension | 1956×992×35mm |
| Weight | 20.5 Kg |
| Junction Box | IP68, 3*20A diodes |
| Output Cables | 4.0mm², 1100mm Length (Optional) |
| Connectors | MC4 compatible (Optional) |
| Packing | 31PCS/Pallet, 748PCS/40’HC |
Raw Materials Sourcing
1. Low-iron Tempered Glass
Anti-reflective coating to increase module efficiency up to 2%.
Light transmittance improvement more than 3%. New technology adopts
on surface to improve self-cleaning ability.
2. Insulation Backsheet
Outstanding weatherproof performance. Low moisture permeability
against snail trail defect. Excellent electric insulation for high
system voltage up to 1500V. White and black color is optional.
3. Solar Cell
Polycrystalline solar cells from black silicon wafers adopt new
technology for higher power efficiency. Stable performance output
even in weak light environment. PID free treatment.
4. EVA Film
Light transmittance above 92%. Snail trail prevention treatment. UV
resistance against ageing.
5. Junction Box
IP68 protection grade. High quality diodes for electric safety and
protection of whole solar power system. 4mm² PV wires with MC4
compatible connectors for easy installation. 1500V system voltage
available.
6. Aluminum Frame
Anodic oxidation layer resistant to chemical corrosion. Strong
mechanical load resistance up to 5400Pa. Silver and black color is
optional.
FAQ of FINERGY Solar Panels
Q1: The efficiency of polycrystalline solar panel is much lower
than mono PERC, what's the competition?
A: It's the truth poly is not so high efficiency as mono PERC. But,
it improved a lot in the past years. The polycrystalline solar cell
efficiency with new technology has exceeded 19.5%. It's most
important that polycrystalline solar panel is much cheaper than
mono PERC product. As per our price policy, it's around 10%
cheaper. It's helpful to the poors to afford solar power in
anywhere is rich of sun irradiation.
Q2: What's the MOQ of FINERGY solar panels?
A: For transportation safety, we usually load solar panels
vertically on pallets. In this case, it's better for customers to
buy full pallet packing quantity. We usually load 30 or 31 pieces
on a single pallet. Consider about the container loading, we
request MOQ of 4 pallets once.
Workshop Environment
60KW Project Reference with FSM330P72 in Europe
