Diesel Gas Fuel Industrial Silica Sand Clay Three Cylinder Premix
Rotary Drum Dryer with High Productivity
1. Brief Introduction of three cylinder rotary sand dryers:
MG Three-cylinder Rotary Dryer is composed of three concentric
cylinders with different diameters. The special three-cylinder
structure makes the inner cylinder and the middle cylinder
surrounded by the outer cylinder to form an own thermal insulation
system. The heat emitted from the surface of the inner cylinder and
the middle cylinder is involved in the heat exchange of the
materials in the outer cylinder, and the outer cylinder is at the
low temperature end of the hot gas flow, so the heat dissipation
area and heat loss of the cylinder are significantly reduced.
Energy-saving three-cylinder dryer can make full use of waste heat,
reduce heat loss, increase the heat exchange area.
2. Application of three cylinder rotary sand dryers:
Powder & particle: Sands, limestone, stones, clay, mineral filter cake, coal, iron
sulphate, filter cakes, fly ash, gypsum etc.
Damp and sticky material: Coal slime, sewage sludge, bentonite, Kaolin etc.
Corrosive material: Distillers ‘grains, Fertilizer, animal dung, slag etc.
Biomass material :Sawdust, wood chips etc.
2. Flow chart of three cylinder rotary sand dryers:
3. Technical specification of three cylinder rotary sand dryers:
| Model | Capacity (t/h) | Moisture after drying (%) | Coal consumption (kg/ton of sand) | Main motor power (kw) |
| MGS623 | 3-5t/h | <0.5% | 7-12 | 4 |
| MGS625 | 5-8t/h | <0.5% | 7-12 | 5.5 |
| MGS6210 | 10t/h | <0.5% | 7-12 | 7.5 |
| MGS6200 | 20t/h | <0.5% | 7-12 | 7.5 |
4. Cutomers visiting and factory pictures of three cylinder rotary sand dryers:
Zhengzhou MG Industrial Co.,Ltd is a professional manufacturer of
dry mortar plant and sand dryer plant over 20 years, providing
turnkey project from working site design, foundation drawing,
installation and debugging, worker training, latest formula,
chemicals, after-sale and life time technical support.
Welcome your inquiry!
