8'x10' construction chain link mesh 2¼”x2¼”(57mmx57mm) diameter
11.5ga/2.75mm cross brace HDG 275 gram tubing 1¼”32mm
Temporary fence for US market:
Chain Link Temporary fence panel is also known as American
temporary fence, temporary chain link fence, portable fence, no dig
fence,temp fencing and mobile fence.It is consist of chain link
panel, round tube frame, steel feet, optional stays and clamps.This
kind of fence has a superior structure, mobility and environmental
suitability is very good.
Main Features
1) Simple structure in linear type ,easy in installation and
maintenance.
2) Renewable resource, could be used for several years.
3) All welding slag are cleared to insure fence smooth surface.
4) Whole panel (welded mesh panel and frame tube) will be silver
spray painted after welding to protect all welding spots.
5) Customized fence shape or specification is also available.
Fence Application
Temporary chain link panel fence is an alternative to its permanent
counterpart when a fence is required on an interim basis when
needed for storage, public safety or security, crowd control, or
theft deterrence.
Temporary chain link panels is also often seen at special outdoor
events, parking lots, and emergency/disaster relief sites. It
offers the benefits of affordability and flexibility.
Specifications
Production | US temporary fencing |
Panel height*length | 6ft*9.6ft ,6ft*12ftetc |
Wire diameter | 3mm, 3.5mm etc |
Mesh opening | 50mm*50mm,60*60mm,etc |
Frame pipe | Diameter:32mm,38mm,40mm |
Surface treatment | 1. hot dip galvanized 2. hot dip galvanized then powder coated |
Clip | Matched with temp fence |
Feet | Metal feet |
Details
Packing and shpping:
Chain link temporary fence is one of temp construction fence which
uses for temporarily block the interrupter ,it consists of 3 parts,
outer frame, steel block, and chain link mesh ,LEADING NEW FENCE co
temporary chain link construction fence are design for easy to
removal and install, No affect the ground surface and change around
environmental, No digging hole, portable, Removable, Workable is
advantage of chain link fence panels for constructions
Temporary Chain Link Fence /Construction Fence Panels Spec |
Tubing | 1¼”(32mm) 1⅜”(35mm) 1½”(38mm) 1⅗”(40mm) 1⅝”(42mm) 1⅞”(48mm)and so
on |
Thickness of Tubing | 16GA/ 1.6mm thick as a standard or customized owned size |
Chain mesh aperture | 2”x2/”(50mm x 50mm) 2¼”x2¼”(57mmx57mm) 2⅜x2⅜(60mmx60mm) 2½”x2½”
(63mmx63mm) |
Height | 4ft/1220mm 6ft/1820mm 8ft/2420mm |
Width | 12ft /3650mm was wide acceptance by market also 8ft 9ft 10ft 14ft |
Panels Size | 6ft x 12ft ,8ft x 12ft, 4ft x 12ft and so on |
Diameter /Gauge | 10ga/3.2mm ,10.5ga/3.00mm ,11ga/2.90mm,11.5ga/2.75mm,12ga /2.60mm
12.5ga/2.5mm 13ga/2.3m |
Base Optional 1 | 36” length x 30” width x 8” Height /914mmx762mmx203mm |
Base Optional 2 | 36” length x 16” width x 8” Height /914mmx406mmx203mm |
Base Optional 3 | 30” length x 18” width x 8” Height /762mm x460mm x203mm |
Standard | ASTM A392-06 |
Steel | Galvanized Steel Construction |
Finish | Corrosion-Resistant Zinc Coating |
Transport Packing | Metal pallet Wrapped with Plastic |
HDG zinc thickness | 14 microns 100gram/SQM 28 microns 200 gram/SQM 42 microns 300
gram/SQM and 84 microns 600 gram/SQM |
3. Chain link fence features:
1). It can quickly and easily be installed, without the need to
disturb the surface area by digging holes or laying foundations.
2). Weather resistant and durable, and will last much longer; The
temporary fences are light and easy to handle while being strong
and robust at the same time;
3). The feet are removable which makes transportation and storage
much easier and more efficient
4). Easy to Erect - four meters a minute
Light and easy to handle
Create a gate at any point on the perimeter
Economical temp fence - can be used time after time
Delivered accompanied by forklift for easy distribution
Constructed from heavy gauge galvanized tube and welded mesh infill
4.Construction chain link fence productive process:
Pre-hot dip galvanized wire drawing--- cut wire and pipes ---wire
weave---cut the corners of the mesh---Pre hot dip galvanized pipes
welded—polish the welds—paint anti-rust epoxy—spray silver powder
coat on each weld—stacking—the packaging
