PVC Film Decorative Gypsum Ceiling Tiles Board for Indoor Ceiling
Decoration
Product description:
PVC Film Decorative Gypsum Ceiling Tiles Board for Indoor Ceiling
Decoration is a material made of building gypsum as the main raw
material. It is a building material with light weight, higher
strength, thinner thickness, convenient processing, sound
insulation, heat insulation, and fire protection. It is one of the
new light-weight panels that are currently being developed.
Gypsum board has been widely used in interior partitions, wall
cladding panels (instead of wall plastering), ceilings,
sound-absorbing panels, ground base panels and various buildings
such as houses, office buildings, shops, hotels and industrial
plants. Kinds of decorative panels, etc., used indoors should not
be installed in the bathroom or kitchen.
Features:
(1) Low production energy consumption. The cementitious plaster
used in the production of gypsum board has an energy consumption
per unit of 78% lower than that of cement.
(2) Lightweight insulation. Using gypsum board as partition wall,
the weight is only 1/3 1/4 of brick wall. At the same time, due to
the porous structure of gypsum board, its thermal conductivity is
0.30. Compared with brick (0.43) and concrete (1.63), it has
excellent thermal insulation performance.
(3) It has excellent fire resistance. As gypsum releases water when
heated, its fire resistance limit can reach more than 2h.
(4) Good decoration function. The surface of the gypsum board is
flat, and the board and the board can be firmly bonded together
through the cementing material, forming a seamless structure, and
the building decoration effect is good.
(5) Good constructability. Gypsum board can be nailed, sawn, glued,
and construction is very convenient. Using it for decoration can
get rid of traditional wet work and greatly improve construction
efficiency.
(6) Comfortable living function. Due to the unique "breathing"
performance of gypsum board, it has the ability to adjust indoor
humidity to make living comfortable.
(7) High production efficiency. It is conducive to large-scale
production. Among various building boards, gypsum board has the
highest production efficiency, which is convenient for large-scale
production.
(8) Low investment. Compared with fiber gypsum board and cement
foam board, gypsum board production equipment can realize
continuous mechanized production, so the equipment utilization rate
is very high and the equipment investment is low.
Specification:
| Length( mm ) | Width ( mm ) | Thickness ( mm ) | Edge |
| 595 | 595 1195 | 7.0 8.0 9.0 | Covered / Non-covered |
| 600 | 600 1200 |
| 603 | 603 1206 |
| 605 | 605 1210 |
PVC Gypsum ceiling tile is available to be produced the thickness
from 7.0-12mm, the design according to customer requirements:
Thickness 8.0-25mm.
Both Metric and Imperial systems are accept |
Advantage:
(1) Sound insulation. The double-layer separated sound insulation
wall composed of thin plates and the double-layer sound insulation
wall composed of hollow slats have a sound insulation effect
approximately equivalent to that of a 24 cm thick brick wall, and
the sound insulation index can reach 40-50 decibels.
(2) Fire prevention. Gypsum board is a non-combustible material
with certain fire resistance, and some can be used as a fire
protection layer for steel structures.
(3) Strength. When the lateral load of the wall is 250 Pa, the
maximum lateral deformation of the wall is not more than 1/240 of
the wall height.
(4) Humidity adjustment. When the humidity in the air is greater
than its own water content, the gypsum board can absorb the
moisture in the air; on the contrary, the gypsum board can release
the moisture in the board, which can play a role in regulating the
humidity in the indoor air.
Application:
Used for suspended ceilings, partition walls, interior wall
veneers, ceilings, sound-absorbing panels, etc.
