AZ31B Pure Magnesium Alloy Extruded Bar / Rod With Diameter
0mm~800mm
Details:
Name: magnesium alloy bar,dissolvable magnesium bar.
Magnesium alloy is an indispensable material for aviation and
aerospace industry. The economic benefit and performance
improvement brought by aviation material weight reduction is very
significant. The same quality of commercial aircraft and automobile
weight reduction brings fuel cost savings. The former is nearly 100
of the latter. In addition, the fuel cost of the fighter is nearly
10 times that of the commercial aircraft. More importantly, the
improved maneuverability can greatly improve its combat
effectiveness and survivability. Because of this, the aviation
industry will take various measures to increase the application of
magnesium alloys. The aluminum materials used in aircraft today
account for about 85% of the total weight of the aircraft.
High-strength, corrosion-resistant magnesium alloy plates perform
better than aluminum plates and have advantages in aircraft
applications.
| Hilbo Magnesium Alloy Material Co., Ltd. |
| TEL:86-769- 81288286 FAX:86-769- 82385085 Website:
www.magnesiumalloyplate.com |
| Address:No.1 West street Zhongnan North Road,Shang sha Community
Chang'An Town,Dong guan City, China |
| Quality Inspection Report |
AZ31B Magnesium alloy rod
Diameter 10mm-130mm | Chemical Component | AL | Zn | Mn | Fe | Si | Ni | Cu | BE | Mg |
| 3.020 | 0.9800 | 0.2700 | 0.0029 | 0.0200 | 0.0005 | 0.0021 | - | Blacne |
Tensile strength
Mpa | Elongation strength
Rp0.2/Mpa | Elongation after breaking
A/% | Conclusion :Passed inspection |
| 220 | 140 | 7% |
| Grade | Chemical Composition,% |
| Al | Zn | Mn | Zr | Si | Fe | Cu | Ni | Mg |
| AZ31 | 2.4-3.6 | 0.15-1.5 | 0.15-0.40 | | ≤0.10 | ≤0.05 | ≤0.05 | ≤0.005 | Bar |
| AZ40 | 3.0-4.0 | 0.20-0.80 | 0.15-0.50 | | ≤0.10 | ≤0.05 | ≤0.05 | ≤0.005 | Bar |
| AZ61 | | | | | | | | | Bar |
| AZ80 | 5.5-6.5 | 0.5-1.5 | 0.15-0.40 | | ≤0.10 | ≤0.005 | ≤0.05 | ≤0.005 | Bar |
| AZ91 | 8.5-9.5 | 0.45-0.90 | 0.07-0.40 | | ≤0.08 | ≤0.004 | ≤0.025 | ≤0.001 | Bar |
| ZK61 | ≤0.05 | 5.0-6.0 | ≤0.1 | 0.45-0.80 | ≤0.05 | 0.05 | ≤0.05 | ≤0.005 | Bar |
Application
Carving, aerospace, concrete tools, 3C (cell phone / camera /
compute), water heater, refrigerator, gas pipelines etc.
Product Advantages:
- Dissolves even at minimal electrolyte concentrations (from 1%) and
any temperature.
- The degradation by-product is a fine powder that does not interfere
with production.
- Any size available.
Performance test data:
| No. | Model | Test condition | Dissolution rate
mg/(cm2*h)) | Strength of extension(MPa) | Yield strength(MPa) | Elongation
(%) | Hardness
(HB) |
| 1 | HB006 | 93℃/3%KCl | 50-70 | ≥370 | ≥260 | ≥2.5 | ≥90 |
| 2 | HB006A | 93℃/3%KCl | 50-70 | ≥310 | ≥220 | ≥6.0 | ≥75 |
| 3 | HB008 | 93℃/3%KCl | 40-60 | ≥400 | ≥300 | ≥4.0 | ≥100 |
| 4 | HB008B | 93℃/3%KCl | 40-60 | ≥370 | ≥270 | ≥5 | ≥100 |
| 5 | HB008C | 93℃/3%KCl | 40-60 | ≥310 | ≥220 | ≥15 | ≥85 |
| 6 | HB012 | 93℃/3%KCl | 40-60 | ≥400 | ≥300 | ≥3.0 | ≥100 |
| 7 | HB011 | 93℃/3%KCl | 15-35 | ≥420 | ≥300 | ≥3.0 | ≥100 |
| 8 | HB016 | 93℃/3%KCl | 35-55 | ≥280 | ≥180 | ≥15 | ≥60 |
| 9 | HB017 | 93℃/3%KCl | 40-50 | ≥200 | ≥140 | ≥17 | ≥55 |
| 10 | HB018K | 50℃/0.84KCl | 50-70 | ≥240 | ≥170 | ≥12 | ≥55 |
| 11 | HB018 | 50℃/0.84KCl | 30-50 | ≥230 | ≥170 | ≥12 | ≥55 |
| 12 | HB010 | 93℃/3%KCl | 15-35 | ≥190 | ≥120 | ≥30 | ≥45 |
| 13 | HB022 | 43℃/0.05%KCl | 50-60 | ≥300 | ≥200 | ≥5.0 | ≥75 |
| 14 | HB023 | 43℃/0.05%KCl | 20-40 | ≥280 | ≥200 | ≥7.5 | ≥65 |
| 15 | HB024 | 43℃/0.05%KCl | 50-70 | ≥260 | ≥220 | ≥5 | ≥60 |
| 16 | HB013A | 43℃/0.05%KCl | 80-100 | ≥260 | ≥230 | ≥3.5 | ≥75 |
| 17 | HB025 | 50℃/0.84%KCl | 90-110 | ≥275 | ≥200 | ≥12 | ≥65 |
| 18 | HB026 | 93℃/3%KCl | 20-40 | ≥450 | ≥350 | ≥3.0 | ≥110 |
| 19 | HB808 | 50℃/0.84%KCl | 50-70 | ≥370 | ≥260 | ≥3.0 | ≥100 |
| 20 | HB019 | 50℃/0.84KCl | 45-65 | ≥230 | ≥180 | ≥12.0 | ≥55 |
| 21 | HB055 | 93℃/3%KCl | 130-150 | ≥220 | ≥160 | ≥12.0 | ≥55 |
| 22 | HB035 | 93℃/3%KCl | 50-100 | ≥100 | ≥60 | ≥42.0 | ≥35 |
| 23 | HBMM6 | 50℃/0.84%KCl | 70-100 | ≥260 | ≥230 | ≥10.0 | ≥60 |
| 24 | HBMM7 | 50℃/0.84%KCl | 90-120 | ≥270 | ≥240 | ≥9.0 | ≥65 |
| 25 | HBMM8 | 93℃/3%KCl | 100-150 | ≥280 | ≥250 | ≥5.0 | ≥65 |
Advantage of Hilbo Company:
Full range of product types, Ensure production capacity
We ave advanced die-casting, extrusion, forging, rolling, casting
processing production line and precision testing equipment. Can
produce a variety of types of magnesium alloy and magnesium alloy
products, and developed a high-strength magnesium alloy extruded
sheet. Through the purification of ordinary magnesium, magnesium
can be raised up to 99.99% of high purity.
Cost advantage
Magnesium alloy casting production can customized as your
requirement. the technical process is great, extrusion production
required for a variety of bar, no need to purchase from abroad,
extrusion molding products is easy molding, low energy consumption,
saving production costs.
Workshop:
Product technology advantages
Engaged in magnesium smelting technology personnel with more than
15 years experience, from the selection of primary materials to
smelting processing has a wealth of experience and mature
management techniques.
We are in magnesium ingots, magnesium alloy extrusion products have
technical research and development capabilities. We are come out in
front in the Magnesium alloy production enterprises
Testing Equipment
Our Services:
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
Certificate:
We have attained ISO9001 and ISO14001 certificates, Standardize and
improve the enterprise quality management system.
FAQ:
1. Q: Are you a factory or trading company?
A: We are direct manufacturer located in guangdong province, and
have our equipment!
2. Q: Are your products customized?
A: Yes,the products in the website are only the common type or the
previous types, we can supply the new products according to your
requirements or drawings.
3. I do not know how to use your product ?
Do not worry ! We can supply technical guidance together with
products.
4. Q: How can I get some samples?
A: Several samples are freely offered for buidling the business
long-term relationships and letting our customers believing the
quality of our products.
5. Q: How does your factory do regarding quality control?
A: Our factory passed CE, ISO, ROSH, UL certification.
