Quality Floor Covering Protection Paper 32 In.* 100 Ft. Used In
Building Construction
Protecting newly decorated floors during construction or decoration
of someone's home or enterprise is an important but boring task for
hardwood flooring contractors.
Do not risk damaging the customer's floor and take time to repair
it.
You have to find the right materials – durable things that can
completely protect the floor without scratching them. You must
ensure that the materials are installed correctly. Then the
material must live up to expectations and not let anything damage
the floor below it.
When other industries come in after their work, many contractors
put down kraft paper or ordinary paperboard as an obstacle. But
there is a safer floor protector available: BTO floor protection
paper.
Product overview
BTO floor protection paper is a kind of heavy construction paper.
It provides temporary floor protection against water spills, paint
splashes, scratches and foot traffic. It is thicker than ordinary
construction kraft paper and Korean pine paper, but it has good air
permeability and can continue to solidify the floor.
BTO floor protection paper is 50% thicker than ordinary building
kraft paper and Korean pine paper. This floor paper is hard and
heavy enough to provide excellent protection for the floor and
surface. 32 inch x 100 foot drum. Excellent floor protection. More
durable than Kraft construction paper.
This heavy-duty floor paper provides excellent protection for all
types of floors and surfaces, including hardwood floors, stairs,
cabinets and even countertops. It has good durability to protect
your floor from the most lasting wear and reduce the loss of
replacement at work. The plate with thickness of 1mm is the
preferred temporary floor protection solution for the needs of
construction specialty!
| Standard thickness | 100gsm=0.155mm with ± 0.025~0.03mm |
| Grammage | +3 or -4% variation |
| Grammage of grey board | 320gsm 350gsm 400gsm( over 400gsm can be customized) |
| Grammage of coating | 15gsm 18gsm 20gsm |
| Thickness | 0.49mm~0.66mm |
| Moisture | 12% with ±2.5% |
| Smoothness | 9-15s |
| Roll size | 820mm hight, 21cm diameter |
| Sheet size | +3/-1 mm (CD) |
| +5/-1 mm (MD) |
| Standard size | 787X1092mm |
| 889x1194mm |
| Special size | As per customer’s requirements |
| Sample | free sample,but freight cost should be paid by buyers |
| Sample size | A4 size ,customized size can be negotiable |
| remarks | Thickness > 1mm, cut into sheets |
Material description: 100gsm~300gsm base paper + coating. Base
paper made of 100% recycled paper.
1) Grammage of greyboard: 320gsm /350gsm /400gsm (Above 400gsm can
be customized)
Grammage of PE grammage:15gsm /18gsm /20gsm
2) Size: 787*1092/889*1194mm and other custom sizes.
3) Sheets and Reels are both available and special sizes available.
4) Printing: Flexo printing, various colors as per your
requirement.
5) Packing: According to customer demand.
Roll: Kraft paper, wrapping plastic films outside.
Sheet: 200~300sheet/per ream, kraft paper, on a wooden pallet.
Wrapping kraft paper or plastic film.
Features:
• The thickness of floor protection plate is about 1mm
• New liquid shield technology
• Quick drop flat
• Reusable
• A roll will cover the same 10 stonemasons
• Hard enough to drive
• Non stain
• Can be stitched together over a large area
• Breathable, allowing moisture to escape
• Breathable tape with building board in large area of joint part
The contractor and / or installer shall determine the appropriate
way to install and use the product according to the situation. If
it is to be used, first determine how much paper is required to
cover your surface, unfold the floor protective paper to cover the
edge, and then stick the joint with breathable tape or joint tape.
Finally, fix the floor protection paper in place with adhesive
tape. In addition, if tape is used, ensure that the surface is
clean and that the tape is firmly fixed to the floor. Consult the
floor manufacturer for recommended tape. Test before use.
Our Advantage
