Lead Free SS316L SMT Soldering Machine For Assembly Line RF 400A

Lead Free SS316L SMT Soldering Machine For Assembly Line RF 400A

SMT Lead Free Wave Soldering Machine for Assembly Line RF-400A

​Product Performance of wave solder RF-400A
1. Chinese and English man-machine interface, can be switched at any time
2. Full touch screen plus PLC control, all parameters are set, saved and recalled in the touch screen
3. With two temperature measurement interfaces, the tem-
perature curve can be tested with the temperature measure-
ment line.
4,. Brand controling system like Mitsubishi, SchneiderOmron etc will warrant the stability of the machine
5. CE certificated
6. Entrance of machine, It can connect with inserting con veyor directly
7. Stainless steel long shaft pin chain conveyor, never abra-sion
8. Stepper motor for sprayer driving, sider/rail for sprayer guiding Sprayer moving speed can be setin touch screen.
9. Moving speed will not be influent by air pressure.
10. Compare with air cylinder driving, it's moving quietly, stably, less maintenance, longer lifetime.
11. Any parts contact with solder they are made of Ti(not plated TI, not cast iron pot). Just like solder pot impeller, wave tunnel, wave nozzle, bolts and nuts etc.
So to grantee the lead free solder's pureness and kep the pot no eroded.
12. Cavesr apeathat at eftef mexdire

Specifications of wave solder RF-400A

Information about wave solder RF-400A

Solder types
Different combinations of tin, lead and other metals are used to create solder. The combinations used depend on the desired properties. The most popular combinations are SAC (Tin(Sn)/Silver(Ag)/Copper(Cu)) alloys and Sn63Pb37 (Sn63A) which is 63% tin, 37% lead. The latter combination is strong, has a low melting range, and melts and sets quickly. Higher tin compositions give the solder higher corrosion resistances, but raise the melting point. Another common composition is 11% tin, 37% lead, 42% bismuth, and 10% cadmium. This combination has a low melting point and is useful for soldering components that are sensitive to heat. Environmental and performance requirements also factor into alloy selection. Common restrictions include restrictions on lead (Pb) when RoHS compliance is required and restrictions on pure tin (Sn) when long term reliability is a concern.

Effects of cooling rate
It is important that the PCBs be allowed to cool at a reasonable rate. If they are cooled too fast, then the PCB can become warped and the solder can be compromised. On the other hand, if the PCB is allowed to cool too slowly, then the PCB can become brittle and some components may be damaged by heat. The PCB should be cooled by either a fine water spray or air cooled to decrease the amount of damage to the board.

Installation Drawing

Detailed Picture of wave solder RF-400A

Unique Automation (referred to as "UA") is a High-speed developing enterprise of High Precision SMT Equipment manufacturer, which specializes in automation equipment for electronics industry.

Basic Information :

* Established Time : in 2010 with headquarter in Shenzhen.

* Facility Area : more than 5,000 square meters.

* Specializing in : wave soldering machine, reflow oven, SMT automatic vision paste printer,

  SMT laser marking machine, conveyors, PCB/PCBA loader & unloader, THT production lines,

   fixtures/pallets, SMT consumables, etc.

* Our aim : “Quality First, Customer Priority”.

Our mian products :

Wave soldering machine, reflow oven, SMT automatic vision paste printer,

SMT laser marking machine, conveyors, PCB/PCBA loader & unloader, THT production lines,

fixtures/pallets, SMT consumables, etc.

In addition to ensuring product quality, we also attach importance to the production environment.

For SMT factory setup, we can do for you:
We provide full SMT solution for you
We provide core technology with our equipments
We provide the most professional tech service
We have wealthy experience on SMT factory setup
We can solve any question about SMT

Our Advantages：

Your inquiry about our products and price will be replied within 24 hours

Well-trained and experienced staffs to answer all your enquires in fluent English

Whole SMT&DIP line solutions provide

Best products and price to offer

Shortest time to delivery the products 

Strict QC before shipping the products

OEM & ODM services offered

We will try our best to provide high quality products for u.

We are always here with u !