HMI PLC All In One Low Level NPN Transistor Output Single Phase Max
16AI 8AO
Precautions for PLC programming
The PLC is compatible with GX Developer8.86/GX Works2 and below. If
you use other versions of software, incompatibility may occur.
When the PLC program is downloaded, there is a prompt error: Cannot
specify the com port,
GX 8.86 software: Online-Transfer settings change com port;
Works 2: All targets-Change the com port in all connected targets;
If there is a communication abnormality, cable abnormality and
other prompts, remove it by cutting off the power, checking the
cable, checking whether the power supply is normal, or replacing
the computer
Parameter: optional ferroelectric
| Display | Dimension | 275*194*36mm |
| Cutout size | 262*180mm |
| Type | 10"TFT |
| Feature | 60K-color resistive touch screen, supports portrait display |
| Memory | RAM | 64MB(HMI when stores historical data, optional ferroelectric is
required) |
| ROM | NOR Flash 16MB |
| CPU | 32bit CPU 408MHz |
| I/O | DI/DO | Max 30DI/30DO (max 28MR) |
| DI/DO level | Input: Passive NPN, public terminal isolated Transistor output: Low level NPN, COM connect to negative; Relay
output: Normally open dry contact |
| DO type and load | Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point
COM; MR: 2A/point, 5A/12 point COM. |
Analog I/O (optional) | Max 16AI/8AO |
| AI type (optional) | Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/
NTC50K/ NTC100K/ 0~10V/ 0~5V/ 0~20mA/ 4~20mA/ -5V~5V/ -10V~10V / mixed |
| AO type (optional) | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed/ -5~5V/ -10~10V (2AO for 1 minus voltage) |
| High-speed function | High-speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ 60KHz + 1 AB phase 10 KHz |
| High-speed pulse | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz. High-speed counting + high-speed pulse < 480KHz |
| Connection | HMI | Type-B HMI download port (can download PLC program through the USB
penetrating function), RS232 |
| 1 RS485 (changed from default RS232) |
| PLC | 1 Mini USB, 1 RS232 (program port) |
| 1 RS485 or 2 RS485 COM ports (one is changed from the default RS232
port) |
| CAN (2.0A/B) port, Ethernet port, WIFI (will occupy default RS232
port) |
| Software | HMI | Coolmay mView HMI Programming Software |
| PLC | Compatible with Mitsubishi GX Developer 8.86 and WORKS 2 |
Advantage:
◆Military level 32 bit CPU adopted, which is faster and more
adapted to industrial environment of high electromagnetic
interference.
◆Special encryption, prevent illegal reading thoroughly. 8-bit
encryption, 12345678 as password can thoroughly prevent reading of
ladder logic program.
◆Clock supported, rechargeable battery adopted.
◆Default with 1 HMI download port, 2 PLC programming ports
(RS232/MiniB USB port or Type-C), and one USB port.
◆Convenient wiring. All wiring terminals adopt 3.81 pitch pluggable
terminals, which is convenient for customers to use.
◆Flexible use. More specifications and batches can be customized
according to customer requirements.
◆32K program capacity, 32K retentive register, support interrupt,
linear arc interpolation ,PID auto-tuning, high powerful.
◆The PLC is compatible with Mitsubishi programming software, and
the HMI uses TK series human-machine interface programming software
mView.
