YK-1800 Hydraulic Mill Roll Stand Used For 3 Ply Automatic
Corrugated Cardboard Production Line
Email: Anna@yikegroup.net
Whatsapp: 008613363699514
ANNA TANG
YIKE GROUP
1. ZJ-V5B hydraulic shaftless mill roll stand
Ø structural feature:
ü Adopt hydraulic drive to complete the paper clamping, loosen,
remove for the medium, translation left and right and others,the
lifting of the paper adopts hydraulic drive.
ü Brake adjustable adopts multipoint braking system.
ü Every stand matched two sets paper car , and they can paper on
the both sides at the same time.
Ø Technical parameters:
1,the range of clamping paper:MAX1400mm MIN1000mm 2,clamping
diameters:MAX￠1300mm MIN￠350mm
3,main shaft diameter of paper holder:￠242mm 4,gas source work
pressure(Mpa):0.4---0.8Mpa
5,equipment size:Lmx4.3*Wmx1.8*Hmx1.6 6,single weight:MAX4000Kg
Ø Hydraulic system parameters:
1.Work pressure(Mpa):16---18Mpa 2,lifting hydraulic
cylinder:￠100×440mm
3,Clamping hydraulic cylinder:￠63×1300m 4,hydraulic station motor
power:3KW --380V -- 50Hz
5,solenoid valve voltage:220V 50 Hz
Ø Mainly purchased parts, raw materials and origin:
| Name of main parts | Brands or place of origin | material |
| Main shaft | Day steel production | diameter242mm |
| Swing arm | Production by own | Resin sand gray ironHT200 |
| wallboard | Jigang prduction | Q235AWelding parts |
| bearing | HRB,ZWZ,LYC | |
| Toothed chuck | Zhejiang xusheng | 3,4inch shared |
| Main electrical appliance | France Schneider | |
| button | CHINT NP2series | |
| Air switch | French Schneider | |
| Pneumatic components | Japan SMC or Taiwan Airtac | |
| Hydraulic station | Shandong zaozhuang | |
| Brake pump | zhejiang | |
