Ge Fanuc IC660EBA025 ， Genius I/O Analog Current-Sourcing Blocks

Ge Fanuc IC660EBA025 , Genius I/O Analog Current-Sourcing Blocks

Technical Information

The GE Fanuc IC660EBA025 electronic assembly is made for the Genius I/O analog current-sourcing blocks. The IC660EBA025 electronic assembly is an integral component of the Genius I/O block and together with the terminal assembly that is known as the GE IC66TBA025 terminal assembly, it makes up the complete Genius I/O analog current-source output block. The terminal assembly provides a base for all the block wiring, including the connections to field devices, bus cable, and hand-held monitors, and it also houses the EEPROM where all the block configuration settings are stored. The IC660EBA025 electronic assembly, on the other hand, contains the block’s processing unit and it performs all the block’s computation, communications, functions, and data storage actions. The IC660EBA025 electronic assembly has a 24/48 Volt DC output block with 6 current-sourcing output channels that can accept 4 to 20 mill-Amps signals.

Unlike the conventional output blocks in its series, the IC660EBA025 electronic assembly can be extended to accommodate voltage applications by using output channels 5 and 6. Power is supplied equally to all output channels and it is isolated from the rest of the block. The IC660EBA025 electronic assembly comes with dedicated Bus Switching Module (BSM) circuitry that is electrically common with the block’s outputs. The IC660EBA025 electronic assembly supports software configuration and the configurable CPU features include the “output hold last state or default” “circuit scaling to engineering units values”, “output feedback checking and feedback time”, and the “CPU redundancy” features. It also performs advanced diagnostics functions like “output over-range and under-range” and “output feedback” reporting. The IC660EBA025 electronic assembly is compatible with a wide range of bus controllers, and it requires a handheld monitor like the IC66HHM501G monitor version 4.0 or later for configuration. The IC660EBA025 electronic assembly can be replaced without removing the wiring on the block and it comes with an open-type design that supports a protective enclosure.

About IC660EBA025

The IC660EBA025 electronic assembly is an electronic assembly that is meant to operate with an analog output block that has been manufactured and designed by GE Fanuc Automation. This electronic assembly can be used with blocks that operate with a voltage of 24 to 48 Volts DC. This assembly includes all the electronic parts that the block requires to operate properly. This assembly also includes overload protection and electronic fusing. Blocks from this series can shut circuits down within 5 microseconds after detecting the fault, and this is more effective than using thermal fuses. The GE Fanuc Automation IC660EBA025 electronic assembly comes with 6 current source options and it also comes with 2 LEDs that indicate the status of the unit and the I/O that have been enabled. The BSM control that comes with the output block is a 24/48 Volts DC BSM and it has a block to block isolation rating of 1500 Volts for 1 minute.

The GE Fanuc Automation IC660EBA025 electronic assembly operates with a power supply voltage of 18 to 56 Volts DC, a maximum current of 600 milliamps, and a ripple of 10 percent maximum. The output signal characteristics of the GE Fanuc Automation IC660EBA025 electronic assembly include an accuracy rating of 0.15 percent at a temperature of 25 degrees Celsius and an update frequency of 25 milliseconds. The block also comes with diagnostic tools that check for underrange, overrange, and feedback errors. This assembly operates at a temperature range of 0 to 60 degrees Celsius and a relative humidity level of 5 to 95 percent, non-condensing. These temperature and humidity conditions need to be met, otherwise the consistent operation of the block cannot be guaranteed.

Technical Specifications for IC660EBA025

Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training. Our company locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.

Our Main Brand:

MITSUBISHI

YASKAWA

PANASONIC

GE FANUC

EMERSON

FISHER-ROSEMOUNT

HONEYWEL

ABB

AB

SHNEIDER MODICON

SIEMENS

................